List of New Products METS 2009

METS 2009 incorporating SuperYacht Pavilion
(as stated by the exhibitors dd 9 October 2009)

7764 Marine
Stand 11.533
C Tim Tsovilis
E tsovilis@7764.gr
T +30 210-6026415
W www.7764marine.com

Marine products
7764 marine established at 1999 and since then cooperates with boat builders producing. * boat instrument panels in wood or carbon fiber in any size or color with any possibility of design and logos.
* boat immitation teak deck ready floor kits. all products have high standarts for marine use.

AAdaptiv Technologies Limited
Stand 10.616
C G.C. Wright
E gary.wright@aadaptiv.com
T +44 845-2243045
W www.aadaptiv.com
M http://www.aadaptiv.com/media.html

LCD Glass Bridge Monitors
AAdaptiv's new Touchscreen technology for the marine environment has now been integrated into AAdaptiv Technologies Marine Monitors. The technology known as projected capacitance touch overcomes the previous problems of water intrusion and screen calibration also ease of operation by either gloved or ungloved finger. This technology is now available on monitors from AAdaptiv Technologies up to 26 Widescreen.

Sunlight LED Waterproof Monitors
LED Backlighting provides a GREEN solution offering less power consumption better temperature control and higher reliability. AAdaptiv's first introductions are 15" and 20" Widescreen monitors being available from September 2009. AAdaptiv Technologies are now in the final production phase of Projected Capacitance Touchscreen versions.

AAdaptiv's Elite PC Computer Solution
The question and dilemma of deciding between an IMO Computer and a PC for your integrated solutions has now been solved. AAdaptiv's Elite PC range satisfies all the parameters for marine certifications and yachting requirements. Both PC's are configured seamlessly to perform all tasks required with today's advanced software developments. AAdaptiv has developed and offers isolation for low frequency vibration and shock. AAdaptiv's design is based on energy efficient solutions that helps lower electrical consumption and operating cost. Our PC's utilize improved power saving technology, such as 85% efficient power supplies, and power management software.

AAdaptiv's GB Remote Control
The GB Remote Control is designed to provide individual control for Backlight brightness, OSD functionality and Signal source for up to x7 Glass Bridge Monitors. To aid installation each Glass Bridge Monitor is equipped with two dedicated RJ45 connections marked Input & Output enabling a Daisy Chain to be configured between multiple Glass Bridge Monitors using standard and readily available Ethernet Patch cables. Each monitor is equipped with a Rotary SW to enable individual monitors to be addressed (Serial Id )

Actisense
Stand 03.128
C L. Keets
E lesley@actisense.com
T +44 1202-746682
W www.actisense.com

NGW-1 NMEA 2000 Gateway
Actisense announces the first intelligent and reconfigurable NMEA 2000 Gateway. The NGW-1 provides an uncomplicated way to link between a boat's data networks, enabling conversion of NMEA 0183 data into NMEA 2000 data and vice-versa. By using the advanced configuration software provided, it is straightforward to set up which data conversions are required for both directions. The NGW-1 is superior to other Gateways on the market as it offers the flexibility of the configuration software. It is available in two versions, a standard ISO version or as a USB PC interfacing option. Actisense is renown for supplying smarter marine electronics and the new NGW-1 continues the range of distinctive, intelligent and robust products.

NGT-1 NMEA 2000 PC Gateway
The new Actisense NGT-1 is the only intelligent NMEA 2000 Gateway available to precisely transfer messages to and from the NMEA 2000 bus. The NGT-1 diagnostic software allows viewing of NMEA 2000 messages plus full configuration options. Leading chartplotter software is being certified to work with the NGT-1. Available in two flavours, the standard option has a USB interface; the specialist NGT-1 option has an isolated serial interface. Actisense is renown for supplying smarter marine electronics and the new NGT-1 continues the range of distinctive, intelligent and robust products.

Admiral Marine Equipment
Stand 02.141
C M. Ünel
E info@admiral.com.tr
T +90 216-4664617
W www.admiral.com.tr

The lowest on deck furler that can reef
The distance between the foot of the sail and the deck is usually about 25cm to 40cm on the standard deck furling systems. For race boats with furlers, the distance between the foot and the deck must be minimum. However, race type furlers, can only entirely furl or unfurl the Genoa; therefore it is not possible to reef and use the Genoa in various sizes depending on the wind strength. On the drums of race furlers, there is just one line of rope, which slips back making it impossible to reef. Admiral Marine Equipment has developed the Race&Reef Furling Systems that made it possible to: 1)Minimize the distance between the sail foot and the deck, 2)Reef and use the Genoa in any size depending on the strength of the wind.

Race & Reef Furler
The distance between the foot of the sail and the deck is usually about 25 cm to 40 cm on the standard furling systems used on the deck. Race boats with furlers need to minimize the distance between the Genoa foot and the deck. However, race furlers can entirely furl or unfurl the Genoa. It is not possible to reef and use the Genoa in various sizes depending on the strength of the wind because there is just one line of rope on the furler drum and when trying to reef, the rope slips back. Admiral Marine Equipment has developed the Race&Reef Furling Systems that made it possible to: 1)Minimize the distance between the foot of the sail and the deck, 2)Reef and use the Genoa in any size depending on the strength of the wind.

Aeronaut Automation
Stand 04.402
C J MrClark
E info@aeronaut.org
T +612 94500800
W www.aeronaut.org

Elektron Hypalon Grinding Tool
Aeronaut's Hypergrinder is a special purpose attachment for sanding or grinding the surface of hypalon fabric used in the production of RIBS and high quality inflatable boats. Before Hypalon is glued, the top surface of the fabric needs to be emoved by sanding the surface. This was a very messy and time consuming process, the Hypergrinder can sand or grind an even and accurate path up to 50mm wide in one pass, so large areas of fabric can be treated at a very economical speed with a finish which is more consistent than with manual grinding. A wide range of standard rubber grinding tools can be fitted to the machine. A dust extractor is fitted to the grinding head so clean-up after the job is absolutely minimal.

Airmar Technology Corp.
Stand 01.207
C M. MarkReedenauer
E mreedenauer@airmar.com
T +1 603-6739570
W www.airmar.com

H2183 Heading Sensor
The Advantage is the Accuracy. Feel confident and comfortable that the H2183 is your reliable source for heading information. The solid-state three-axis compass, combined with Airmar's additional advanced sensors provide unparalleled performance. What sets the H2183 apart from the competition is its ability to maintain 2° of heading accuracy under dynamic motion conditions, such as steep heeling, hard turns, and rough seas. Heading integrated with the three-axis rate gyro and three-axis accelerometer data allows the H2183 to maintain 2° of accuracy even if the vessel is pitching and rolling up to 30°. This level of accuracy is perfect for interfacing with autopilots, chart plotters, and radar systems.

Ultrasonic WeatherStation Instrument
The new Airmar WeatherStation Instrument informs you of
instantaneous changes in the weather. Wind Speed and Direction are measured using four ultrasonic transducers. The internal WAAS/EGNOS GPS engine and three-axis solid-state compass allow the unit to provide both Apparent and True Wind Speed and Direction without adding additional sensors. The WAAS/EGNOS GPS provides navigation data as well as magnetic variation and is suitable as your primary GPS source. The internal temperature and barometric pressure sensors help predict changing weather patterns. Combined with the internal heading sensor, most of your navigation needs are provided! No other sensor on the market incorporates all of these features in one compact housing.

New NMEA 2000 Transducers
Airmar now has NMEA 2000 versions of the B744V, B122, and ST850. The B744V features include Depth, Speed, and Temperature in a single housing with sounding down to 180 meters (600 ft). The B122 Bronze Long-Stem is designed for wooden vessels with a thick hull or sailing vessels with a steep deadrise. Features include Depth and Temperature with 235 kHz operation that prevents interference with on-board fishfinders. A High-Performance Fairing is included on both the B744V and B122. The ST850 is a speed and Temperature only, thru-hull sensor available in plastic, bronze, or stainless steel housings with valve. All three new transducers feature a retractable insert for easy cleaning and service, along with a standard 6-meter NMEA 2000 cable.

Ultrasonic Depth, Speed & Temperature Sensor
Airmar's NEW NMEA 2000 Ultrasonic Depth, Speed & Temperature Sensor is the industries first of it's kind. With no moving parts, the sensor is capable of accurate readings at all vessel speeds. What sets this apart from the traditional speed paddlewheel sensor is the excellent accuracy at very low-speeds between 0.5 and 5 knots (0.6 and 6 MPH)-an important feature for sailboat racing. The accuracy at high-speeds up to 50 knots (57 MPH) makes it an important sensor for powerboats. By eliminating the paddlewheel, there is no fouling, and virtually no drag. Rated at 100 W power, the internal, 235 kHz depth transducer provides depth readings in as little as 0.5 m (1.6') of water and can reach depths up to 100 m (330').

PB200 Ultrasonic WeatherStation Instrument
The new Airmar WeatherStation Instrument informs you of instantaneous changes in the weather. Wind Speed and Direction are measured using four ultrasonic transducers. The internal WAAS/EGNOS GPS engine and three-axis solid-state compass allow the unit to provide both Apparent and True Wind Speed and Direction without adding additional sensors. The WAAS/EGNOS GPS provides navigation data as well as magnetic variation and is suitable as your primary GPS source. The internal temperature and barometric pressure sensors help predict changing weather patterns. Combined with the internal heading sensor, most of your navigation needs are provided! No other sensor on the market incorporates all of these features in one compact housing.

Ampair
Stand 03.210
C D. Sharman
E david.sharman@ampair.com
T +44 1344-303313
W www.ampair.com

Ampair 6000 wind turbine
A stylish small wind marine grade wind turbine of 6kW output and 5.5m output. Ideal for using on industrial sized offshore structures or for powering remote lighthouses. Can be used at coastal locations such as on breakwaters & port facilities. Suitable for either grid connection or battery charge systems. Does not require regular maintenance. Includes telecommunications package (GSM, GPRS, Iridium) to enable remote monitoring of all important operating parameters. Cost competitive with grid (utility) electricity at windy locations without the need for subsidy. Designed to IEV 61400 Class 1 for the worst conditions worldwide. All Ampair products are fully marine grade & hot/cold weather proof. Winner of Rushlight award 2009 for wind power.

Andersen Winches
Stand 09.606
C Lars Legarth
E info@andersenwinches.com
T +45 7642 7777
W www.andersenwinches.com

ANDERSEN Racing Winch Handle
The new ANDERSEN Racing Winch Handle is ergonomically designed for perfect power transfer. It is featuring a unique patented automatically lock-in and easy push button controlled release, which means that the handle slides and locks itself to the winch without having to activate any kind of mechanism. Upon release the push button is simply to be pushed downwards by the use of one finger. The handle is made of highly polished stainless steel combined with composite makes the design strong, light and impressive.

Anode Eye Ltd.
Stand 03.305
C S.P. Hopkins
E contact@anodeeye.co.uk
T +44 (0)1752 494929
W www.anodeeye.co.uk

Anode Eye
Anode Wear Indicator Anode Eye Ltd has designed, developed and produced a totally unique product with the potential to help a boat owner save thousands of pounds unnecessary expenditure. The Anode Eye is a brand new product in the worldwide market. It has been developed to let the owner or crew know that their anodes have worn out without the need to lift their vessel or use divers, both expensive operations and only good at the time of the inspection. The through hull fitting is manufactured for Anode Eye Ltd by Tru Design Plastics and has been certified by the International Marine Certification institute (IMCI) in Belgium.

Anode wear indicator
Anode Eye Ltd has developed a product with potential to save thousands of pounds of unnecessary expenditure. The reliable and effective Anode Eye is a anode wear indicator, which allows you to check the state of your sacrificial anodes without entering the water or lifting your boat? It is the only indicator that allows you to check the condition of your anodes whilst the vessel is afloat. It is fitted through the hull of the vessel behind a pre-drilled anode. When the anode erodes it allows light to pass through the Anode Eye window indicating that it needs to be replaced. We are currently seeking Distributors.

Aquatic AV
Stand 11.514
C Martin Harding
E mharding@gmaeurope.com
T +44 1329 663414
W www.fasindustries.com

AQ-iP-3B
Latest in the range of "3 Series" Aquatic AV waterproof audio video systems is the AQ-iP-3B, a combined "in dash" iPod dock and audio system designed to be used with all versions of iPod without the need for multiple adaptors. Full iPod on screen menus are displayed on the large LCD and like all "3 Series" units the AQ-iP-3B also features an FM/AM radio, various accessories are also available including wired and wireless remote controls. Aquatic AV are specialists in the design and manufacture of audio video systems for use in harsh environments - in addition to the waterproof "flip down" cover (IP66) and internally coated components the AQ-iP-3B unit is built to withstand high levels of vibration and shock etc.

Armstrong Nautical Products
Stand 11.613
C R. Sedlack
E sales@armstrongnautical.com
T + 772- 286-7204
W www.armstrongnautical.com

RIB Ladder
The RIB Ladder, Armstrong Nautical Products latest in a long line of innovative ladders. Until now boarding a RIB from the water could be most difficult. Finding a place to mount a boarding ladder to be convenient to use and not obtrusive was a bit of a challenge. Armstrong's new RIB Ladder system is designed to support 181 kilos and meets or exceeds the ABYC H-41 standard for boarding ladders. And this new ladder's ability to maintain an outward angle makes it easier to climb much like a step ladder. Easy to remove/replace the ladder, no tools. With no holes to make in the RIB tube the surface bonded mounts make the ladder simple to install at the aftermarket level as well as the OEM level. Armstrong's RIB Ladder.

Atlantis WeatherGear
Stand 04.403
C J. Offermans
E johanoffermans@gmail.com
T +31611929933
W www.atlantisweathergear.com

Aegis Hybrid Bib
New at METS 2009 is Atlantis WeatherGear. Discovery. It's what life on the water is all about. Atlantis WeatherGear, based in Marblehead, MA, USA, has been designing products with the discovery of this life in mind. Aiming at a wide range, from the demanding professional to the occasional day-sailor, each item of clothing has one sole purpose: comfort. Comfort comes from years of experience and most importantly feedback from users. Using this knowledge has led to an innovative and very broad line for gear, from base layer to offshore. The quality of the products has reached such a high level that is has been chosen as official gear for the US Sailing Team. Starting in 2010 available in stores in Europe.

Autonautic Instrumental
Stand 01.252
C M. Fabregat
E marc@autonauticinstrumental.com
T +34 93-5409949
W www.autonauticinstrumental.com

Magnetic compass Outfit for steel boats with NMEA sensor
It is our pleasure to introduce the new version of our Reflector magnetic compass outfit MED/SOLAS approved with NMEA compass sensor installed and aligned to the compass so the customer can be used straight away. That product is focused on the customer of these type of magnetic compass, listening to his issues and challenges, and finally meeting those challenges with this product unmatched in quality and functionality. Specially designed for steel boats professional workboats and fishing vessels with steel hull. Design Features: -Class A 125mm card Magnetic compass. -Periscope. -B+C compensation system built-in. -Main and emergency with high quality LED light. -Watertightness canvas. -Reduced shipyard installation work.

New table top magnetic compass
Autonautic instrumental have pleasure to introduce the new version of our Table top or reflector magnetic compass. That product is focused on the owner of professional workboats, small fishing vessels. Listening to his issues and challenges, and finally meeting those challenges with that product unmatched in quality, functionality and competitive price. Design features: -Reduced installation shipyard -Arrangement for NMEA pick up. -Class A 125mm magnetic compass -Low weight -Reinforced ABS binnacle.

NMEA capability
Autonautic now supply their world class C20 range of Class A Reflector of table top magnetic compasses optionally fitted with a NMEA 0183 pickup. The pickup is attached to our compasses and aligned at the factory such that the NMEA0183 $HDHG sentence is mapped to the heading indicated on the compass card. Even after the magnetic compass has been swung and compensated in the traditional manner the NMEA sentence will continue to correspond to the compass card reading. A solution like this has many advantages. Heading information is continuously available even when stationary. The helmsman can continue to use the magnetic compass whilst identical heading information is delivered to the navigation systems.

Azure Wear UK
Stand 03.425
C M.S. Raza
E info@azurewear.co.uk
T +44 208-5313792
W www.azurewear.co.uk

Sailing Gloves
Sailing gloves made of AMARA and Spandex. Kevlar stitching with silicon printing in the palm and the middle of fingers for maximum protection and grip. Neoprene cuff for easy movements. Kevlar stitching for maximum strength. Padded palm for comfort. This gloves is first of this type in the Marine Market, available in full fingers and cut fingers. Please come and see this new product at stand No. 03.425. Look forward to see you.

Bär Nautic Boarding
Stand 11.727
C S. Gruber
E gruber@baer-cargolift.de
T +49 7131-2877166
W www.nauticboarding.com

Bär Marinelift - available in the systems Standard, StandardPlus, SliderParty and SliderBoat
Bär Nautic Boarding offers four different Bär Marinelift systems mountable to different yacht sizes: Standard, StandardPlus, SliderParty and SliderBoat. Each system is available in four load moment levels for divers applications. Whereas he retractable tender lifts SliderParty and SliderBoat provide now solutions for the tender boat recovery and for a comfortable and dry boarding of the crew, the systems Standard and StandardPlus are classical bath lifts with a maximum diving depth of the platform. All Marinelifts consist largely of seawater resistant aluminum and dispose of diverse new safety features such as start and safety mode in the control unit, hydraulical/mechanical safety lock of the platform, duo aggregate etc.

Barrow International/Suncode Bimini
Stand 03.100
C David Barrow
E davidbarrow@btconnect.com
T +4401590 688332
W www.barrowint.co.uk

Suncode Bimini
BLEW STOUB
Stand 01.501
C C. Gorsky
E catherine@blew-stoub.com
T +33 2 97 37 95 33
W www.blew-stoub.com

Lash tang
This recent innovation is a removable lash tang including a textile fitting that offers a reliable, light and low aerodynamic drag interface between a loop and a panel such as deck or mast. This system can be easily set up and dismantled for stepping, refit, control or replacement of loops and cables. This new product is specially designed to suit our winding strops. Any prototypes or super yachts rigging can be fitted with. BLEW STOUB is particularly proud to have provided this new fitting for 60'Open Groupe Bel, the new launched Freers 60 and the recently winner of North transatlantic record, the prestigious Maxi Banque Populaire.

Blue Sea Systems
Stand 02.112
C Scott Lechner
E slechner@bluesea.com
T 360-738-8230 x103
W www.bluesea.com

SafetyHub 250
The innovative SafetyHub250 increases the safety and reliability of the boat's electrical system while saving money and reducing needed space. This is accomplished by combining a compact sealed seven circuit ignition protected 1A - 200A fuse block with a remote battery switch. These essential components and integrated connecting plugs eliminate vulnerable wiring connections and allow main battery control from a safe location. The SafetyHub250 utilizes low amp blade-type fuses and high amp MIDI® fuses to gain the broad amperage range.

Bowmaster
Stand 02.224
C N. Wood
E ned@bowmaster.co.nz
T +64 9-8350968
W www.bowmaster.co.nz

Bowmaster Superbox Swivel
Bowmaster introduces the new Lloyd's Register type approved Superbox Swivel, designed to meet the high end standards of the Superyacht building industry. The Superbox Swivel is the shortest possible connector available from the anchor to the last common link of the chain. The main advantage of this is that, with further forward placed winch gear and anchors, the owner can enjoy much more deck space. Made from high tensile stainless steel the Superbox Swivel breakload exceeds the U3 chain breakload. CNC machined and presented with an exquisite hand mirror polished finish, the Superbox Swivel offers very high corrosive resistance and is extremely hard wearing. Bowmaster manufactures the swivels in 12 sizes suited to anchors from 50 to 8500kg.

Byggstrom AS
Stand 09.405
C P. K. Gjoestoel
E per.kristian.gjoestoel@byggstrom.no
T +47 67-175870 / +4791332101
W www.byggstrom.no

Power pedestal, shore power systems
Byggstrom as in Norway have launched a brand new series of Power pedestals and are marketleader in Norway. Professional industrial designer K8 and Byggstrom have develloped a modern proffecesional pedestal. The pedestals are made in robust extruded aluminum profiles with top of moulded aluminium. The pedestals can be equipped with light. The Byggstrom pedestals offer a versatile and dynamic range of products, highly adaptable to each individual client. The elegant and modern design will fit into any environments where design is essetial. Alfa pedestall is suitable for all boats which need 16A. Beta pedstall is suitable for all kind of boats up to Super Yachts and can have fra 2-6 sockets from 16A to 125A 3.phase.

Caframo 12 and 24 Volt fans
Stand 11.212
C Aron O'Brien
E marine@caframo.com
T 519-534-1080
W www.caframo.com

Kona
Kona is a 12-Volt weatherproof fan designed for exterior use that can withstand the effects of direct and continuous water spray or dust. It is IP55 rated to ensure full functionality while under these stresses. The blade and grill combine to deliver an airflow rating of 266CFM on high speed. The 3 speed fan draws only .21 Amps on low, .26 on medium, and .37 on high. It is therefore battery-friendly and ideal for sailboats and other smaller battery capacity vessels. Kona is designed and tested with the latest in integrated, parametric 3D product-design software ensuring maximum airflow and efficiency out of the fan. Versatile two mounting options include cam-lock suction cup for portability throughout the boat and bracket permanent mount.

Candock Inc.
Stand 01.109
C E. la Violette
E candock@candock.com
T +819-847-2599
W www.candock.com

Candock Utility Chanel System
We are well aware that there are not enough marinas at this time to supply the demand for boat spaces. Some marinas have waiting lists that are more than 2 years long! We also know that a lot of projects for expansions and new marinas are slow to start because of the enormous costs of standard marina docks. The actual state of the economy also has its effects on projects. Candock can offer you a better solution at a much lower cost. The modularity of our system will also permit you to shape your marina to fit what ever space you have available to exploit it to its maximum potential and also to reconfigure it easily from year to year to fit the demands of your clients. Adding to it would be child's play.

Carbonautica
Stand 03:421
C C. Dymock
E intsales@carbonautica.com
T +33 553 232570
W www.carbonautica.com

Gangway/Passerelle
The new Carbonautica gangway weighs in at only 4.5 kg and has a working load of 350kg (max 400kg). It is so light it actually floats!
Carbon Deck organisers
Three and four rope deck organisers in solid carbon.
Carbon Instrument box
Carbon 20/20 mast box for standard Raymarine instruments
Carbon Bathing/Side-boarding Ladder
A carbon fibre bathing ladder with extension for dual use as a
side-boarding ladder.

Comfortis® Quality bedding for the Yacht industry
Stand 09.219
C G.T Feenstra
E info@comfortis.nl
T +31 0 514-681317
W www.comfortis.nl

Sleepshape®Gold
Incredibly innovative and simple to use, this uniquely created motorized "Sleep Shape®Gold" was created to enhance the comfort and leisure time of our customers. In contrast to products found on the market, Where the electrical slat system in any shape and size a problem was. Sleep Shape®Gold exhibits it's uniqueness by introducing a product that appeals both to the yacht and motor home industry and is not limited to any particular shape or size. The Sleepshape®Gold is easy to use with a click on the button you can change to any desired position. The hight of the mechanism is only 11cm, with that you save valuable space. not limited to any bed shape prevents condensation and cold Keeps the mattress clean.

Corderie Lancelin Henri
Stand 04.404
C Nicolas Lancelin
E lancelin@lancelin.com
T +33 2 43 05 13 86
W www.corderie-lancelin.fr

Light weight relative lifeline with Dyneema®
Light weight retro reflective lifeline with Dyneema®, with night visibility for even more safety.

Crewsaver
Stand 01.436
C Mark Lutman
E sales@crewsaver.co.uk
T +44 23 9252 8621
W www.crewsaver.co.uk

Crewfit 190N Lifejacket
The brand new Crewfit 190N Lifejackets from Crewsaver are packed full of innovative features, unmatched across today's markets. Approved to the new BSEN ISO 12402-3 standard they are the only inflatable Lifejackets for leisure boating on the market to offer 190N of buoyancy. Their slim, ergonomic design fits the natural contours of the body, for freedom of movement. Patented inflation chamber design allows the dual asymmetric lobes to overlap providing maximum turning performance. The integrated back mesh panel sculpted around the shoulders distributes load evenly. Innovative dual waist belt adjustment system ensures quick and secure donning. Plus versions include a newly designed built in Spray Hood, easily accessible when deployed.

Crewfit 190N Lifejacket
The 190N Lifejackets are approved to the new standard BSEN ISO 12402-3. * They are sleek, lightweight and very technical with features unmatched across today's markets. * The cover is 3D shaped to follow the body's natural contours. * The integrated back mesh panel and the fixed dual crutch straps keep the Lifejacket in the correct position on the body. * Dual waist belt adjustment for easy & quick donning. * Patented inflation chamber design: when inflated the two asymmetric lobes overlap providing maximum turning performance when unconscious. * Additional features: soft feel collar, dual lifting beckets, reflective tape, reflective piping and whistle. * Plus versions include a light and a newly designed permanently attached Spray Hood

CRISTEC
Stand 01.816
C A. Rolland
E info@cristec.fr
T +33 298538082
W www.cristec.fr

Digital Battery Monitor
CRISTEC will be launching at METS its brand new digital battery monitor: JBNUM-CPS3. This new system has been designed to monitor up to 3 batteries simultaneously. It is compliant for any LEAD or NICKEL CADMIUM battery with a capacity ranging from 1 to 2000Ah in 12 or 24VDC. You can check the battery charge status, current and voltage. This display operates on the principle of navigation with buttons and a black-lighted graphic LCD. Various parameters such as alarm type & threshold, number of battery can be set. Supplied along with a 250A/100mV shunt and a RJ11 10m lenght cable, the new CRISTEC battery monitor is easy to install. This innovative and smart battery monitor matches very well with new CPS3 chargers launched early this year.

CRISTEC CPS3 12V-40A 3 Banks Battery Changer
Optimal made-to measure charging for a longer battery life CRISTEC is proud to offer you the assets of its 4th generation HF battery charger range, having already sold more than 70,000 HF units throughout the world. Innovative characteristics: Silent operating: 12V/16A, 12V/25A, 12V/40A, 24V/12A & 24V/20A chargers have no cooling fan Worldwide use: universal and
auto-ranging AC input voltage and frequency Charge up to 6 batteries simultaneously: CPS3 offer an extra terminal to connect an additional external battery isolator for connecting up to 6 independent battery banks Available in 12,24 and 48V from 12 to 150A Easy to install: optimal ergonomics 3 year guarantee, French Manufacturing

C-Tech Ltd
Stand 02.232
C Alex Vallings
E c-tech@c-tech.co.nz
T 64-9-810-8406
W www.sailbattens.com

CT SnuffAir
CT SnuffAir is a 2-piece spinnaker retrieval system with a strong inflatable bladder on the inside of a chafe guard. Designed to be attached to a spinnaker sock/sleeve in place of a rigid hoop the CT SnuffAir has the following advantages: - Bladder can be deflated and dropped down the fore hatch with the spinnaker: no restrictions on hatch size - Safer for crew members on the fore-deck, lighter and easier to handle - Space saving: can be deflated and packed away with the spinnaker - Bladder cannot be over-inflated; safely handled by different operators - Inflatable ring has no hard edges, does not cause damage to mast, rigging or sails. The CT SnuffAir can be supplied with a spinnaker sock fitted with a high-temp control-line pocket.

CTEK
Stand 09.322
C Anna Hansson
E info@ctek.com
T +46 22535180
W www.ctek.com

D250S Dual and SmartPass
The CTEK SmartPass is an intelligent gateway for current between alternator(s), starter battery, service batteries and critical/non-critical 12V loads. Together with CTEK D250S Dual a system combines: 1. Battery Separator. 2. Multi-step charging.
3. Separation of consumers and service batteries during charging.
4. Over-temperature protection of service batteries. 5. Battery watch. 6. Maintenance charge of starter battery. 7. Solar panel regulator with Maximum Power Point Tracking. 8. Simplified installation of batteries for bow thrust or anchor winch. The user of the system will gain: 1. Maximized service battery. 2. Maximized service battery capacity. 3. Minimized time and cost for charging.
4. Minimized environmental impact.

Davis Instruments
Stand 11.204
C Jean-Paul Kok
E euro@davisnet.com
T +31786194316
W www.davisnet.com

Vantage Vue Wireless Weather Station
HAYWARD, California - Davis Instruments introduces the newest addition to its line of weather stations with the new Vantage Vue ™ weather station. Vantage Vue features Davis' legendary reliability, accuracy and ruggedness in a station that is more affordable and easier to install than ever. Vantage Vue uses frequency-hopping radio spectrum technology to wirelessly send data up to 1,000 feet (300 m) and provides weather updates from the outdoor integrated sensor suite to the indoor console every 2 ½ seconds.

Delite
Stand 01.414
C psjJessen
E psj@delite.dk
T +4570229990
W www.delite.dk

Cabinlite
The Cabinlite is a modern stainless steel lamp. The Cabinlite marks a new generation of oil lamps as it is replacing the traditional and old-fashioned style with a Scandinavian design. The circular burner being integrated in the central part of the lamp offers three advantages all at once: the sensitive burner is well protected. The opening of the oil reservoir is comfortably wide so as to make the filling of it as easy as pouring yourself a drink. Last not least we achieve a very attractive slim design! The Cabinlite, fastened to the wall mount with a magnet, swings round an axis at right angles to the wall. The bushes for the suspensions in the wall mount are thermoplastic causing a slightly reduced and completely noiseless movement.

Dimension-Polyant GmbH
Stand 04.319
C Barbara Grefkes
E info@dimension-polyant.com
T +49 2152 891-0
W www.dimension-polyant.com

D4® Membrane Technology
D4® Premium with Dyneema® is a new product developed by DIMENSION-POLYANT that for the first time successfully incorporates Dyneema® as the load bearing fibre in a custom load path sail membrane. D4® is a custom laminate, designed and made to meet the specific requirements of a particular sail on a particular yacht. Between two outer surfaces yarns are pre-determinedly disposed to resist the loads. The result is an individual and technically superior solution for each sail. Dyneema® fibre has been described as "the strongest fibre in the world" whilst also exhibiting excellent stretch and UV resistance, key requirements for a long lasting sail. Being naturally white it has aesthetic qualities important in sectors such as SuperYacht's.

Dive-N-Dog
Stand 11.523
C M. Cahill
E mcahill@divendog.com
T +1 941-3753565
W www.divendog.com

Comfort Step Ladder
This economy ladder features a 2" deep, fully covered comfort tread. No more painful feet on the narrow rungs. This ladder gives you the wide, easy to step on comfort treads that everyone has always wanted! The ladder is constructed of 304 stainless steel, standard double wall tube and is 12" wide. Available in 3 or 4 step models.

VLockâ,, Modular Accessories Mounting Kit
V-Lockâ,, is a Universal Mounting System that solves the problem of multiple, diverse and permanent accessory mounting devices. With the V-Lockâ,, system you simply install the base unit around your boat in logical, convenient locations. Each accessory, device or tool is then mounted to a V-Lock insert and can be placed in any V-Lockâ,, Base giving you location flexibility and efficiency. The V-Lockâ,, system allows you to move an accessory on or off the boat, transfer locations and replace accessories with another without the use of any tools! V-Lockâ,, gives you utility, flexibility and safety.

ezCLEAT
ezCLEAT is the fast, clean and easy way to tie-up your boat. The pop-up cleat features integrated, retractable lines and a patent pending dual locking mechanism. Your deck and dock will be clean and free of tripping hazards. You will love the look, feel, and performance of ezCLEAT and enjoy having greater control of your boating experience. Constructed of 316 stainless steel and ABS and glass filled nylon plastics. Available in 1/4", 3/8" and 5/8" sizes.

DockAdd Fender Systems
Stand 01.600
C C. de Ruijter
E claudine@dockadd.com
T +31 (0) 20-6422062
W www.dockadd.com

Dock bumper
DockAdd continue to think with boat owners. The many years'experience and knowledge which has been built in protecting boat and dock, have resulted in developing a new profile: the dock bumper with PE core. This profile has been developed because of the increasing demand for more robust profiles which can protect boats up to 50 ton. The dock bumper has optically become a beautiful, effectively and durable profile. The profile is provided with a PE core with a dense cell. Because of this it has sufficient impact strength and is it shock-proof. Partly due to the good price-quality relationship, DockAdd expects to have put an attractive product on the market.

Dock wheel
After a lot of enthusiastic responses to the corner wheel, DockAdd now also brings a dock wheel on the market. The dock wheel is mounted on the side of the dock. The smooth and rolling movement of the dock wheel makes it more comfortable to moor the boat at the dock. The dock wheel consists of two parts; the wheel and a straight foot. The wheel is made of flexible PVC and can be inflated with a valve. The galvanized foot is a straight piece which can be very easy mounted to the dock. The dock wheel is available in the colors white and dark blue. Besides the galvanized design the corner wheel and dock wheel are now also available in a stainless steel design.

Mat bollard
By the large question to brushed stainless steel anti-theft bollards DockAdd has now incorporated this bollard in the assortment. In contrast to the bollards with one leg this new brushed stainless steel bollard can very well be used to prevent theft of the boat. The opening between the legs offers the possibility to use an anti-theft lock. The brushed stainless steel bollard has a beautiful and tight design with a dimension of 25 x 9 cm. The brushing gives the bollard a distinctive look and is given a pattern of very fine lines. Because of the best stainless steel the bollard is free of maintenance and has a very long life span. The dock gets an extra effect by the brushed stainless steel bollard of DockAdd.

Dometic GROUP
Stand 10.417
C Doug Curtis
E marinesales@dometicusa.com
T +1 954 973 2477
W www.dometic.com

Breathe Easy (TM) Air Purifier
Banish the odors of tobacco smoke, mildew, mustiness, chemical vapors, and toilets, and inhale fresh, clean, healthier air. The Breathe Easy™ Air Purifier uses innovative Photocatalytic
Nano-Mesh technology with ultraviolet (UV) light to destroy airborne biological contaminants and odors. Airborne pollutants such as pollen, mold spores, bacteria, viruses, fumes and odors are sterilized or molecularly transformed into nontoxic elements. The Breathe Easy Air Purifier reduces 57 percent of volatile organic compounds in a 6-hour period, and uses a specific frequency of UV light that produces no harmful ozone. Quiet operation and easily replaceable UV lamps are just a few key advantages of the Breath Easy Air Purifier.

SmartStart (TM) Control
Dometic Marine's SmartStart is a single-phase compressor motor startup control that smoothes out power spikes by up to 65 percent. Power spikes occur when an air conditioning system cycles on, and can cause brownouts, flickering lights, tripped circuit breakers and even damage to the generator. Typical single-phase soft-start products reduce startup surge by 20-40 percent. By reducing startup surge by as much as 65 percent, this gentler method of handling a power surge can mean the difference between boatowners keeping the generator they already have, or investing thousands of dollars on a larger generator.

Emerald Series Split Air Conditioning System
Dometic Marine's Emerald Series split-system air conditioning systems are smaller, quieter, lighter, more efficient, less power hungry, more reliable and easier to install and service. The Emerald Series air conditioning systems are also designed to run on environmentally friendly R410A refrigerant, which meets EPA and international requirements for ozone-depleting substances under the Montreal Protocols. The evaporator and condensing units have been totally re-engineered to optimize performance around the characteristics of R410A, harnessing its green-gas benefits while producing maximum performance in terms of unit form factor, capacity, reliability, performance and user benefits.

Dometic Group
Stand 01.715 and 01.615
C Kester Petersson
E info@dometic.se
T +46 8 501 025 00
W www.dometic.com/water

Marine electric barbecue
Unique selling points: Tempered glass lid flush fitting with the countertop with innovative magnetic locking device. Minimum installation height: 85mm Grid with double position (meat/fish) Easy to clean.

Dr. LED
Stand 04.405
C Alain Fontaine
E info@DoctorLED.com
T +1.206.388.3701
W www.doctorled.com

Cobra Bicolor LED Chart Light
This is the world's first and only bi-color (Red/White) single
high-flux LED chart and reading light that provides both red and warm-white light.

Bi-Color (Red / Warm White) LED Chart Light
The Cobra is a general purpose gooseneck chart light with a single bi-color high-flux LED that provides either red or soothing warm white light. This light is fabricated from the highest quality components to assure long life and trouble-free functioning. The patented internal circuitry provides consistent brightness and makes them immune to life-shortening voltage fluctuations. Their incredibly low power draw (0.15A @ 12V) makes them the perfect way to reduce energy consumption.

LED Recessed Light
The Saturn Ring MKII is a general purpose, recessed, water resistant fixture in your choice of spotlight or floodlight models with the added benefit of high-flux LED technology. These lights produce a warm white light and are fabricated from the highest quality components to assure long life and trouble-free functioning. Their patented internal circuitry provides consistent brightness and makes them immune to life-shortening voltage fluctuations. Their incredibly low power draw (0.25A @ 12V) makes them the perfect way to reduce energy consumption. Exactly the same form factor as our popular cluster LED Saturn Ring. High-flux LEDs, the latest LED technology, out-perform cluster LEDs in all respects.

Surface Mounted Submersible LED Light
The Dave is a general purpose surface mounted waterproof light with three high-flux LEDs. This light is fabricated from the highest quality components to assure long life and trouble-free functioning. One piece solid aluminum housing provides strength and ample heat sinking to the LEDs to ensure long life operation. Their patented internal circuitry provides consistent brightness and makes them immune to life-shortening voltage fluctuations. Their incredibly low power draw (0.5A @ 12V) makes them the perfect way to reduce energy consumption.

Waterproof LED untility / spreader Light
The Kevin is a general purpose waterproof light with four US made high-flux LEDs. This light is fabricated from the highest quality components to assure long life and trouble-free functioning. Die cast aluminum housing provides ample heat sinking to the LEDs to ensure long life operation. Their patented internal circuitry provides consistent brightness and makes them immune to life-shortening voltage fluctuations. Their incredibly low power draw (1A @ 12V) makes them the perfect way to reduce energy consumption.

Through-Hull Mounted Underwater LED Light
The Neptune is a general purpose through-hull mounted LED light with three US made high-flux LEDs. This light is fabricated from the highest quality components to assure long life and trouble-free functioning. The aerospace-grade anodized aluminum composite body makes it extremely corrosion proof and the surface as hard as steel. Their patented internal circuitry provides consistent brightness and makes them immune to life-shortening voltage fluctuations. Their incredibly low power draw (~1A @ 12V) makes them the perfect way to reduce energy consumption. NMMA, USCG, ISO 8846 & SAE J1171 Ignition Protection Certified ABYC H-27 (Load Test) Certified.

Drainman/Erbinen AB
Stand 09.209
C Peter Nilsson
E info@lansman.nu
T +46 (0)31-7881600
W www.lansman.nu

Drainman Powered by nature
Introducing the New Ecofriendly Innovation That Will Keep Your Boat Dry! Tired of bailing out your boat? Do you live far from the docks and worry about your boat filling with water? The
Swedish-made Drainman helps you solve these problems. Using the natural power of wind and waves and the tug they create on the mooring line, the Drainman automatically takes care of bilge pumping. No electricity required. Drainman is tested in tough conditions and performed extremely well. The Drainman can pump up to 2,500 lit/24h and have a strength of up to 10,000 Newton. Ecofriendly and efficient, around the clock. We do look forward to discussions with companies interested in the distribution of Drainman. www.drainman.nu

Echomax
Stand 11.121
C J. Simpson
E echomaxsales@aol.com
T +44 1371-830216
W www.echomax.co.uk

Active-X Radar Target Enhancer
Echomax will have on display for the first time at METS their new state of the art Active-X RTE which has more than twice the RCS and one tenth of the current draw of competing products. The Active-X has a triple alarm facility as standard.

EchoPilot
Stand 03.200
C M. Phillips
E info@echopilot.com
T +44 1425-476211
W www.echopilot.com

3D Forward Looking sonar
Echopilot have been leading manufacturers of forward sonar for 17 years and have now developed a revolutionary 3D forward sonar. The seabed and all underwater and floating features ahead of the vessel are shown in a realistic three dimensional full colour display. Boat owners can now benefit from a detailed view of the hazards ahead enabling them to navigate in difficult waters with more confidence and safety.

Facnor
Stand 04.214
C Dominique Yon
E info@facnor.com
T +33 (0)2 33 88 50 20
W www.facnor.com

FlatDeck
This innovative Facnor product is the first furling and reefing system that combines a low profile drum with a discontinuous webbing line and brings all the advantages in terms of furling ease, performances and safety.

Fastmount Ltd
Stand 02.226
C J.M. Hong
E info@fastmount.com
T +6421725418
W www.fastmount.com

VS-M1 Vario Clip
Award winning Fastmount panel mounting systems has expanded their range with the Vario self tapping male clip. Specifcially developed for the marine industry VS-M1 is designed for variable gap, high shear strength applications such as seat backs, wall panels & exterior panels. Benefits include variable clipping depth; perfect alignment with secure mounting; removing and refitting panels in any sequence; high shear load; and time and cost savings. Fastmountâ,, Multi-award Winning Panel Mounting Systems.

PS-150 PanelSafe Restraint System
Award winning Fastmount panel mounting systems has added to thier range with an innovative panel safety system. PanelSafe provides added security and control of removable panels. The panel is suspended below the ceiling for convenient servicing behind the panel; or controlled panel removal by releasing the wire. Variable lengths are available to suit the application. Typically used with large and heavy panels; inspection & service panels; panels above valuable furniture & artwork; and use in fire egress paths. Use with Fastmountâ,, system clips & installation tools. Fastmountâ,, Multi-award Winning Panel Mounting Systems.

Fenghua Sunway Metal Industry Co.,L
Stand 01.626
C G. Yu
E glen@sunwayindustry.com
T +86 574-88636278
W www.sunwayindustry.com

Boat ladder / Vents / Rigging screw / Round ring
Sunway is a marine hardware producer, We have many years of experiences of stainless steel products and hot dip glavized products. We have the biggest boat ladder production in China, We have wide range of them. We also have big prodution of vents, rigging screw and round ring in China. Sunway also produce all lot of other boat hardwares, pls browsn our website www.boatladder.cn

FinScan
Stand 04.102
C C. Khamu
E carlo@finscan.com.au
T +61 2-94327854
W www.finscan.com.au

Bio eStart - Fingerprint engine starting technology
The FinScan Bio eStart eliminates the need for traditional engine keys and start stop panels. They are replaced with one device that manages the starting process for single to quad installations. A finger is simply placed on the fingerprint sensor to arm the engines, and the start and stop buttons made available on the FinScan head unit manage the engine starting process with a light touch. The Bio eStart is designed for very simple programming and use, with the ability to store one thousand fingerprints(equivalent of one thousand keys). This allows multiple fingers, partners and crew to also be stored as operators who can start the engines, with no keys or codes to remember. Plug and Play engine harnesses also for EVC, Smartcraft and others.

FinScan Bio eStart
FinScan have released a new "Fingerprint Engine Starting Technology" called Bio eStart. By simply touching the fingerprint sensors, the engines can be started securely, without keys, codes, floats or fobs. The system caters for single to quad engine installations. Finger programming and finger bypass for third party marina's and service agents is made very simple with Master and Valet wireless fobs supplied with the system. Options include: FinScan's ESM - Elevated Safety Mode, incorporating the Bio eStart keyless ignition, fume detection and blower control. This combination delivers an electronically controlled engine starting procedure, that ensures the safety of occupants on gasoline powered boats, from accidental explosion.

Fischer Panda GmbH
Stand 02.500
C J.L. Langer
E info@fischerpanda.de
T +0049-5254-92020
W www.fischerpanda.de

Fischer Panda HybridDriveSystem
The new Fischer Panda HybridDriveSystem comprises a new digital generation of Diesel-Electric Drive Systems with integrated onboard power. Central to this is the new C3Cockpit, which provides everything needed to fully control and manage onboard power and propulsion. The converter unit can be supplied with various voltages. This marks a new dimension of energy management. Command, Control and Communication are the key elements. All components communicate via a bus system. The active battery and generator management is integrated. Remote access and updates are available via a GSM or Ethernet. The system is NMEA 200, CAN-bus and SD-card capable. The Fischer Panda C3Cockpit can operate as a onboard power system, even without a Drive System.

FLIR Systems
Stand 01.308
C C. Maras
E flir@flir.com
T +31 (0)765 79 41 94
W www.flir.com

M-626L
The FLIR Systems M-626L combines a thermal imaging camera with a low light camera. It provides crisp, clear thermal imagery in total darkness and light fog or smoke. It does not need any light whatsoever to produce an image. Packaged in a small,
ultra-compact gimbal it is designed for the most demanding maritime applications. The FLIR M-626L is a perfect tool for night time navigation, shipboard security, man-overboard situations, anti-piracy and many other applications. The thermal imaging camera is the perfect tool for navigating on the darkest of nights, needing no light whatsoever to produce a crisp image. The low light camera can be used when at least some light like moonlight, starlight of environmental light is present.

Foresti & Suardi S.p.a.
Stand 01.557
C Mandelli Anna
E info@forestiesuardi.it
T +0039.(0)35.938066
W www.forestiesuardi.it

HALLEY
Removable table LED lamp with glass or plated lampshade, for inside and outside application. This LED lamp has from one side, a eletrical base IP65, to be apply on table, furniture's surfaces, where you need a removable point of light. The lamp itself has a connection clamp, to be fixed inside the base, and a switch to light on/off, just turning 90°the body. In case you need to light on different places of the boat, you can just install more bases and use only 1 body. To understand better the application, imagine to be on an open boat, where in the evening/night you need to light the table for a dinner. In this case you will have the possibility to put the body of the lamp inside the base and to light on the area you are interested in.

Future Fibres Rigging Systems S.L.U
Stand 01.640
C Phil Anniss
E info@futurefibres.com
T 0034961452135
W www.futurefibres.com

Low Profile (LP) Adjuster
Future Fibres has launched a revolutionary new deck termination for its market leading PBO rigging system. Called the LP Adjuster, the company's Valencia based R&D team has removed all unnecessary metalwork to develop the new interface. The resulting simple, yet elegantly engineered solution can now be attached directly into the boat's chainplate, saving a staggering 60 percent of the weight and more than two thirds of the height of a traditional turnbuckle. Able to work across the full range, from a 40 foot day sailor to the largest superyachts, the new system is a big step forward for product optimisation - offering a highly cost effective alternative to a traditional turnbuckle.

Garmin
Stand 01.103 and 01.101
C L. Rosset
E mediarelations@garmin.com
T +44(0)2380 524000
W www.garmin.co.uk

VHF 300i AIS
Garmin the global leader in satellite navigation is proud to announce the VHF 300i AIS marine radio, with premium features including multi-station support, a space-saving black box configuration and options such as an integrated dual-band AIS receiver. Nigel Craine Marine OEM Manager for Garmin said: "With the VHF 300i Garmin is targeting the installation of larger, high-end boats at the OEM level. "Since the VHF 300i's industrial design complements the rest of the Garmin Marine Network, boat builders will find Garmin an increasingly attractive option when outfitting their helms."

Gianneschi Pumps and Blowers S.r.l.
Stand 01.748
C A. Gianneschi
E info@gianneschi.net
T +39 0584-3651
W www.gianneschi.net

Nautic Equipment
The Gianneschi Pumps and Blowers has supplied its components to pleasure boats, merchant and military ships, ranging from 12 to 100 mts in length; particularly focused on megayachts market with custom and special products. The Company's production extends over a covered area more than 3000 sqm completely renewed in 2008, containing offices and manufactoring departments. Gianneschi Pumps and Blowers manufactures pumps, water pressure systems, blowers, water heaters, engine pumps, compressors and electric motors in DC and AC voltages. The materials used to realize the final products are selected in order to ensure high performance and longevity in marine environments.

Glassfix Marine Services
Stand 10.301
C B. de Gardeijn
E info@glassfix.nl
T +31 0111-414941
W www.glasfiks.com

Special coating line
From the revolutionary nano technology a pionering new Yacht Protection System has been developed, consisting of an exclusive protection range that consedes to the wishes of super yacht owners etc. The nano technology comes forth from the world of atoms and molecules and is based upon microscopie small parts that apply a breathing, water and dust resistant layer. This layer is invisible and protective. Our Yacht Protection System realizes a self-cleaning effect to almost every material * YPS Nano Wood Coating---for the protection of teakdecks * YPS Nano PTFE Caoting---for the protection of synthetics and stainless steel * YPS Nano Glass & Ceramic Coating---for the protection of mirrors and sanitary.

Gleistein Ropes
Stand 01.226
C D. Brackschulze
E brackschulze@gleistein.com
T +49 421-69049-45
W www.gleistein.com

all kind of ropes
Gleistein today is internationally successful and a world leader in rope technologies, especially well known in the yachting industry for the superyacht owners and racing freaks, always delivering the perfect line.

Globe Electronics
Stand 04.206
C Patrick Potiron
E patrick.potiron@globe-electronics.fr
T +33 2519-68848
W www.globe-electronics.fr

Man Over Board
Detection and location system for ship crew created to make easier a "Man Overboard" rescue. The Sea Belt is made up of a radio transmitter/receiver system based on the detection of emission's absence, activating alarms, location and rescue.

Sea Belt
Sea Belt is a safety device that enables an automatic detection of a Man Overboard. Thanks to a fast trigger alarm, the Sea Belt makes easier the rescue of a crew member overboard and increases survival chances. The Sea Belt is made up of a radio transmitter/receiver system based on the detection of emission's absence. Transmitter comes as an individual case carried by each crew member. When the signal between the transmitter and the receiver is cut by water contact or by an important distance, the warning device is triggered. It detects a Man Overboard in approximately 10 seconds.

GN Espace Galley Solutions Ltd.
C J. Kimberley
E info@gn-espace.com
T +44 (0)1992 893713
W www.gn-espace.com

GN Espace marine cooker with MDG system - Multi-D
GN Espace has developed an innovative and unique marine cooker which features a Multi-directional Gimballing (MDG ) system. The result is that the cooker copes with heeling and also oncoming waves keeping the cooker completely level whilst sailing. This allows the cooker to be used safely in a wider range of sea conditions.

GS Composite
Stand 01.303
C Gregor Slapar
E info@gs-composite.com
T +00386 41 777 889
W www.gs-composite.com

Exclusive Carbon Gangway
Prestige Carbon Exclusive gangways have a unique carbon fiber outlook. They are coated with a special UV-resistant transparent coating which protects carbon fiber against UV rays and sea. With the numerous testing's and searching for product designed to insure the safety for it's users GS Composite has over the years developed perfect structure hi-tech ultra light and resistant carbon gangway. GS Composite gangways are an innovation in the nautical area, as they are the first gangways, which are manufactured by VARTM system. It is a unique manufacturing technology enables the gangway is extremely lightweight and the construction is extremely solid. Personalized gangway is unique accessory for every boat.

Guidi S.r.l.
Stand 01.826
C I. Merlo
E info@guidisrl.it
T +39 0163-418000
W www.guidisrl.com

Guidi non stick valves, double intake version
Guidi has expanded the range of the double intake version (3-way valve) up to the 4" (threaded) and DN 100 (flanged). The 3-way valve makes it possible, by stopping the water intake from the sea, to operate the water intake from the bilge offering a remarkable help in the bilge drainage (besides the traditional safety function of opening/closing the sea water flow for cooling the engine). These new valves have been mounted aboard a prototype vessel since September 2008 with excellent results and performances. Duration, Safety and Technology are the quality axioms that, once again, distinguish Guidi.

Guy Cotten S.A.
Stand 04.314
C Jacques Beuze
E info@guycotten.com
T +33 2 98 97 66 79
W www.guycotten.com

Isolatech
Isolatech (Patented system) Insulation technique...
Condensation is a natural phenomenom that occurs inside traditional waterproofs as soon as there is a difference in temperature between the outside and the inside of the garment. Our Isolatech System is using the double glazing principle. The condensation is greatly reduced! A number of products of the Guy Cotten range is benefitting from the Isolatech innovation, like the Isopro and Derby jackets. This innovation is included in all the garments marked with the Isolatech label. This innovation is mainly aimed at persons requiring very strong or traditional clothing when sailing on classic boats or in sailing school. It reduces the condensation and make the garments comfortable to wear.

H+B technics GmbH+Co. KG
Stand 11.700
C H.B.Bäumer
E office@h-btechnics.com
T +49 251-70397907
W www.tenderlift.com

Various new platform configurations combined with lifting devices
- Platform-Lift with horizontal telescope platform movement
- Platform-Lift with sloping platform 0-20° movement
- Platform-Lift combined with self-levelling VARIO-Stairs
- Stern wall of Yacht, revolving and combined with Platform-Lift

Hall Spars & Rigging
Stand 01.407
C Kristan McClintock
E info@hallspars.com
T +1 401 253 4858
W www.hallspars.com

SCR
Hall SCR is the lowest windage carbon-fiber rigging on the market today. Hall SCR is solid, not bundled, making it the smallest diameter composite rod for equal stretch. It does not require the braided outer sheath found on other composite rigging products, further improving windage. In addition, we've designed new end fittings made from Titanium that are far smaller and lighter than anything in currently available in the composite rigging sphere. Smaller diameter rod combined with much smaller end fittings means less windage and increased speed.

Halyard (M&I) Ltd.
Stand 03.303
C J. Grazebrook
E techhelp@halyard.eu.com
T +44 1722 710922
W www.halyard.eu.com

Halyard Millenium Separator Range
Halyard's new Millenium Separator range draws on 25 years of marine exhaust experience. Simple, stylish, economic and effective, the Millenium range replaces the old 500 series which sold by the thousand for ten years. The new units are reversible, so they can be used right hand or left hand facing. Each unit comes with a choice of down angle and horizontal outlets. Four sizes cover exhausts from 40mm diameter to 75mm diameter. The range replaces the 500 series unit - the world's first pressure moulded separator - which finally killed the sploshing sound of generator exhausts disturbing nearby boats into the evening. They are already a standard with Britains's three largest boatbuilders, and is Halyard's most successful export.

Harken Inc.
Stand 11.219
C Gail Rice
E harken@harken.com
T 001 (262) 691-3320
W www.harken.com

RADIAL Winch Range
UniPower 900 Radial

Haveco B.V.
Stand 01.414
C J. Jongh
E info@haveco.nl
T +31 0229-563517
W www.haveco.nl

Mobile Wireless Alarmsystem
Mobeye is a mobile alarmsystem for your ship or caravan. Its a wireless system and gives a silent alarm when the infra-red sensor will be passed by a heated object. The alarm will be given to your Mobile Phone by SMS and a phonecall. Mobeye has an extreme low energy consumption, so the battery works over a year. You can change the sensibility of the sensor. Mobeye gives you a signal when battery level becomes low. You can easily install your Mobeye without 220V and phonewires.

Henri Lloyd
Stand 03.137
C Amy Grealish
E info@henrilloyd.co.uk
T +440161 7991212
W www.henrilloyd.com

Henri Lloyd Blue Eco Jacket
The Henri Lloyd Blue Eco Jacket represents the first wave of environmentally friendly marine apparel. Constructed of HL's highly functional new TP Eco technology, the jacket is lightweight, highly durable, 100% water/wind proof and breathable. The jacket benefits from high quality design features - articulated elbows & underarms, adjustable cuff design and a storm flap with drainage channel that covers a two-way non corrosive zip and an adjustable hem adjuster, fleece-lined collar, inner security pocket and two large fleece lined hand-warmer pockets, whilst the jacket's rollaway hi-vis articulated hood, benefits from an aperture adjustment, the design of the jacket offers room for generous layering and features a breathable lining.

Heol Composites
Stand 01.714
C L. Tournier
E contact@heol-composites.com
T +33 2-97531719
W www.heol-composites.com

One-shot autoclave cured appendages
This brand new composites moulding technology allows production of one-shot autoclave cured appendages as rudders, foils, daggerboards, keels... The whole foil, including nominal UDs and shear webs, is pre-preg laminated in a dedicated closed female mould, then 6 bars / 120°C "one-shot" cured in appropriate autoclave. The resulting part is an amazing "monobloc" hollow structure which doesn't require any further labour except direct painting and fitting to steering system. Not only lighter & stronger, this technology also leads to drastic labour costs reduction, whether on serial or custom high-tech production.

Holmatro Marine Equipment
Stand 01.547
C Saskia van der Heijden
E marine@holmatro.com
T +31162751400
W www.holmatro-marine.com

Holmatro Winch, The winch reinvented
The Winch Reinvented
This full range of winches has a great number of features that are unique in her market, and engineered for the best results. A winch that is technically engineered, and optimized for every sailor in the world.
Grip & Run®
The advanced drum surface(patent-pending), creates both improved "grip" on sheets in radial direction, and minimal resistance, "run", on the same sheet in vertical direction. The use of progressive grooves will result in less muscle power needed to generate the same amount of sheeting force.
Weight:
The use of high tech aluminium alloys, advanced composites, and an innovative design creates a lightweight winch, with a stunning improvement of 25% to 50 % to comparable models in the market.

Innov'Vent
Stand 04.318
C P. Mauriac
E pierremauriac@innov-vent.fr
T +33 (0) 952 501 700
W www.innov-vent.fr

RotoWind
Innov'Vent developed a new concept of deck hatch: RotoWind. RotoWind, with his patented technology, is the first opening and rotating hatch. It's possible to adjust RotoWind in accordance with your wishes. With the RotoWind hatch, whatever the wind direction, you can catch the wind and maintain satisfactory ventilation without creating too much drought in the cabin. With 4 opening sizes (280, 350, 420 and 520 mm), RotoWind integrate the existing models. An optional kit is proposed to replace square hatch. 94 % of the sailors want to have a RotoWind on their boat, and RotoWind become an important part in decision to buy a new boat in 85% (Investigation Horizons Experts).

RotoWind
Today, what can be understood everywhere from magazines is that getting efficient cabin ventilation is a real issue. The solution for yacht builders is as before to mount more hatches and portlights. Here again, the effectiveness of these devices is limited since it depends strongly on the wind direction. With the RotoWind hatch, whatever the wind direction, you can catch the wind and maintain real satisfactory ventilation without creating too much drought in the cabin. Another essential asset of RotoWind is that it can be left open while sailing, creating far better conditions of navigation for your crew. Rotowind is rotating and adjustable from within the cabin. No need to be on the deck to trim the hatch.

Interphase Technologies, Inc.
Stand 11.715
C Charles Hicks
E charles@interphase-tech.com
T +(831) 477-4944, ext 11
W www.interphase-tech.com

ULTRASCAN PC90
Interphase introduces a major breakthrough in forward looking technology. The new Interphase Ultrascan PC90 uses advanced techniques to create high resolution, forward looking underwater images at the speed of sound. The result is amazing movie-like, streaming video images that show movement of fish, schools of bait and provides continuous live feedback when navigating narrow channels, around rocks, reefs and other underwater obstacles. This black box style sonar consists of a fixed phased array transducer, Ultrascan sonar module and Ultrascan PC software. The Ultrascan can connect to PC's, PC Networks, Recent Apple computers even Wi-Fi connections using a common Ethernet cable.

Iris Marine
Stand 03.109
C Tony Digweed
E enquiries@scubar.co.uk
T +44 1489 798484
W www.iris-marine.com

IM-RDC-01
The IM-RDC-01 Rapid Deployment Marine Camera is being launched at METS 2009 as one of the new SeeseaTV cameras for 2010. It is a completely new design and is the first of its kind. From docking to deck hand surveillance, forward visibility to temporary security, the ease and speed in which the IM-RDC-01 can be deployed is a breakthrough in Marine CCTV. The camera and bracket come packaged in a waterproof equipment case and it only requires the turn of a switch the liven the battery and start the cameras operation.

Italvipla S.r.l.
Stand 05.337
C S. Tura
E info@italvipla.com
T +39 035-830368
W www.italvipla.com

ITALVIPLA
"OPERA SILK" that is a soft vinyl fabric with an elegant silk aesthetic appearance, but the most important characteristic is his contexture and formulation that permitted to obtain a lower thermic conductibility if compared to any vinyl fabrics on upholstery market. After two years of laboratory tests, the result on dark colours (for example cacao brown or navy blue), have confirmed that the "Opera silk" upside temperature under the sun exposure is about 30% lower than a normal vinyl. (May be a little difference for any colour). Obviously it is waterproof and mildew resistant and it could be used for interior and exterior luxury upholsteries.

ITALVIPLA
"ECO-VIPLATEX" an ecologic vinyl fabric that is made with an innovative process obtained with an environment friendly treatment without harmful chemical substances (according to the Reach norm). This product has been developed for obtain an anallergic and no-toxic special vinyl fabric suitable for all people with sensible or allergic skin. Moreover this product has a very low harmful gassing emission on respect to the environment.

ITALVIPLA
In the "waterproof fabrics collection" the important new product is "MARINTEX" a new fabric made with a new solution dyed polyester yarn, stabilized against UV rays and with a high tear resistance. It has passed several strong tests and it is suitable for any utilization: awnings, sprayhoods, tents, bimini, winter covers and other.

ITALVIPLA
"DAYTONA" is another very appreciated outdoor vinyl quite similar to a suede leather. It has been introduced three years ago but in the new productions we have considerably improved the technical characteristics with a new chemical contexture formulation. In fact this product has met a large assent from the customers for his pleasant and unusual face and now they can find moreover the necessary high quality for outdoor application.

ITT Corporation
Stand 01.530 and 01.541
C R. Wetering de Rooy
E rijkje.de.rooy@itt.com
T +44 1992-450145
W www.jabsco.com

233SL Searchlight
The NEW ITT Jabsco 233 Searchlight is a one-of-a-kind searchlight that is impressive from all angles. This Dual Beam Searchlight sports a clean, modern look with a multitude of new features never seen before in a searchlight of this size and price range. The 233SL has a continuous 360° rotation range and a 27° vertical range. It also benefits from flood and spot settings, allowing you to change the beam configuration between the two, and also an auto sweep function which allows the light to sweep 10° either side of the initial target spot. This can all be done in either fast or slow mode.

Deluxe Flush 14
The DF14" is the latest addition to the ITT Jabsco's Deluxe Flush Range. It offers many benefits including; a Space saving stylish design, virtually silent operation, the option of fresh or raw water rinse models, a non-clogging large bore flush pump which macerates waste. It Uses less than 1.0 amp/hour (12Vdc) per day and is ISO 8846 MARINE - Ignition Protection. All Products in the DF Range are available with either an angled or straight back, for easy installation with a minimal footprint, and sport regular household size seats. They come complete with the new multi-function "one touch" control pad, which offers four flush and empty options plus the choice of leaving the bowl wet or dry.

Lite Flush
The NEW Lite Flush Toilet brought to you by ITT Jabsco, has been designed to instantly retro-fit your existing Jabsco manual toilet and to give your bathroom a modern stylish look. The innovative design offers both low power and water consumption (1.2 litres (1.3 US Quarts) per flush) with an integral rinse and waste pump system. This toilet benefits from being Lightweight and compact, and has NEW quiet and efficient flush pump technology. It has a slow close lid for a little extra luxury and is available with either a Footswitch or control Panel option.

Rule Mate II
ITT Rule has launched a new updated range of their highly successful automated Rule Mate bilge pumps. After extensive research and exhaustive testing the new Rule Mate series has greatly improved reliability plus a host of new features, including an anti-fouling impeller, thermal overload protection and solid state water sensing technology that eliminates the need for a separate float switch. The Rule-Mate bilge pumps are built with a robust housing design which incorporates a "one-touch" test feature. They are available in 500, 750 and 1100 US GPH models and come complete with a quick-release strainer for easy cleaning, straight and angled hose barb fittings and a 3 year warranty.

Johnson Outdoors
Stand 11.207
C S. Roth
E steveroth@swansonrussell.com
T +1 402-4376418
W www.geonavmarine.com

G12 Multi Function Display
An innovative blend of style and performance, Geonav’s new G12 Multi-Function Display (MFD) combines intuitive functionality with an impressive, ergonomic design. Through exclusive features like Pane Manager and HaloViewâ ,, Rotation, the G12’s BlueLogicâ,, User Interface allows users to easily select and customize multi-pane 2D and 3D charts, sonar, radar and other navigation information. First-of-a-kind DualFuelâ,, Cartography lets users choose between Navionics® or C-MAP® by Jeppesen® charts. With powerful XD Sonar, G12 becomes the only MFD in its class to offer built-in sonar. The G12’s 2kW, dual-frequency (200/50 kHz) transceiver provides precise readings up to 1,000 metres deep.

i-Pilot
i-Pilot is the first ever GPS based trolling motor. A GPS controller built into the motor communicates with a wireless remote to unlock several innovative functions never before seen in an electric trolling motor. i-Pilot allows the fisherman to record trolling patterns to memory and automatically retrace the pattern. The Spot Lock feature allows the fisherman to automatically hold his boat over a specific location. It's like having an electronic anchor. Cruise control lets the fisherman maintain a constant speed to optimize bait presentation. Speed can be set in 0.1 MPH or KPH increments. The AutoPilot function locks the boat onto a heading and keeps the boat on a perfectly straight course. i-Pilot is a breakthrough in fishing technology.

Jotron
Stand 01.309
C ToreHolm Hammersmark
E sales@jotron.com
T +47 33139729
W www.jotron.com

Tron AIS-SART
Tron AIS-SART is the future search and rescue transmitter and will be adopted into the GMDSS regulations as an alternative to the Radar-SART. The unique and innovative feature of the Tron AIS SART is the combination of its physical size and technical capability. What separates this new innovation from standard radar sarts, is that it can be located at a far greater distance, with GPS precision, using standard equipment (AIS) that automatically positions the persons in distress on a map. The Tron AIS SART will contribute to a more effective and less time consuming search and rescue operations in the future, with the result that more people in distress will be saved!

KANNAD
Stand 04.309
C Elodie Kérignard
E contact@kannad.com
T +33 2 97 02 49 49
W www.kannad.com

SAFELINK
Safe design
An innovative integrated antenna for extra protection removes the risk of accidental damage. Epirb is tested inside wall bracket or smart float free container to avoid wrong handling and false alarms Easy to convert from manual to automatic model Simple and User friendly controls Intuitive press buttons Red for activation and Green for Test Easy handling One hand only to remove and activate Non hazardous battery pack replaceable by end-user Convenient for remote areas. Friendly to the environment, carriage by any transportation mode E-Programming and beacon management service by end-user Programming on www.manageyourbeacon.com for safer data and beacon history. (battery life, next service, ID, address...)

Karver
Stand 11.220
C Pierre Asselin
E contact@karver-systems.com
T +33231883798
W www.karver-systems.com

KBW
KBW - The Karver Ratchet Block.
Designed and developped for sportboats, the KBW ratchet block is being tested on the YUM Boats' K650 to be ready for METS 2009. Main innovation: the position ratchet/non ratchet can be activated regardless to the way the rope is going (impossible to have the block turning the wrong way!). Specifications: weight: 80 g. Safe working load: 350 kg. Attachment: lashing through the center of the block (of course), lashing guide fully integrated to the block's cheeks.

Kebony
Stand 09.404
C J.T. Nielsen
E info@kebony.com
T +47 06125
W www.kebony.com

Kebony decking
Kebony Products AS of Norway proudly announces their new sustainable alternative to teak decking: Through a process that utilize a bio-based waste product to permanently modify the cell structure of sustainable maple, Kebony Products AS have developed Kebony decking. The product is being introduced to the worldwide boatbuilding industry at the 2009 METS.

Kelvin Hughes Ltd.
Stand 01.123
C T. Smallwood
E southampton@kelvinhughes.co.uk
T +44-2380-634911
W www.bookharbour.com

Wiley Nautical Almanac 2009
The Wiley Nautical Almanac 2009, launched on 11 May 2009, is a new, comprehensive directory of harbour, tidal and weather data. Available as a free digital download from www.wileyalmanac.com, it enables quick and easy access, at home or on board, to essential navigation, meteorological and key contact information - even without an internet connection.

Kenyon International Inc.
Stand 02.214
C P. Williams
E pwilliams@kenyonappliances.com
T +860-664-4906
W www.kenyonappliances.com

Kenyon SilKEN
The patent pending, Kenyon "SilKen" is a revolution in galley cooking. Combining induction stove technology with high temperature silicone and you have the perfect blend of form and function. SilKen sets exceedingly high standards for energy efficiency, spill retention, pot retention, easy clean up, quick heat dissipation, safety, provides unlimited color and design options. This form of flameless cooking has advantages over traditional electric & gas burners-Rapid Heating-Improved thermal efficiency-Consistency of heat. The U.S. Department of Energy states induction cook tops is 84% efficient, electric burners are 70% and gas is 40% efficient - making a case that induction cooking has positive implications for the environment.

KIWIGRIP (dba Pachena, LLC)
Stand 04.405
C W. Stiggelbout
E willy@pachena.com
T +1 206-306-2222
W www.kiwigrip.com

Non-Skid / Anti-Slip System
KIWIGRIP'S new improved slow-dry formula retards the drying of our hugely popular and successful 2008 formula. This affords a longer working time before the system starts to gel. The new formula has no effect on the efficacy, durability, and beauty of KIWIGRIP. Because of its water-based, near-zero VOC nature, the KIWIGRIP system has become very popular in the new-build, charter, as well as refit segments of the marine industry. For complete information, please visit www.kiwigrip.com or google "KiwiGrip" for customer comments.

KNS Inc.
Stand 11.921
C W.S. Chang
E wschang@kns-kr.com
T +82 4293-203512
W www.kns-kr.com

Marine stabilized antenna systems for Satellite Communications and Television
KNS Inc is one of the world¡¯s leading manufacturers of marine stabilized antenna systems for Satellite Communications and Television at sea. KNS Inc offers more than thirteen basic models, ranging in antenna size from 0.3 meters to 3.0 meters that are used by vessels in all market sectors ranging from fishing, offshore, pleasure boats, luxury yachts, cruise liners, merchant and military vessels.

Kobelt Manufacturing Company Ltd.
Stand 01.341
C J. Kobelt
E jack@kobelt.com
T +1 604-5723935
W www.kobelt.com

Marine Steering & Brakes
Kobelt Manufacturing provides the marine industry internationally with propulsion controls, steering gear, propeller shaft brakes and deck machinery controls. Our product range has push/pull mechanical controls, pneumatic and electronic controls, hydraulic steering gear up to 160 ton meters with full electronic integration as well as disc brakes for propeller shaft brakes and winch application. Our in-house bronze diecasting capability allows us to offer a two year guarantee and makes Kobelt extremely price competitive.

Leon Sports Ltd.
Stand 05.529
C William Lee
E williamlee1038@gmail.com
T +8613912352118
W www.leonltd.com

Snorkel jacket
Patented snorkel jacket, for snorkel and free diving, comfort and mobile.

Inflatable radar reflector, light weight and tall
For boaters and divers, who are left at sea, to deploy while waiting for rescue. Height: 180cm. Diameter: 16cm and 20cm. Inflation method: 1. High flow oral inflator. 2. Scuba second stage regulator. Weight: 200grams or 500grams.

Mobile inflatable life jacket
So light, compact and mobile a inflatable life jacket, you will be unaware of its existance.

Life sling
Inflatable life sling with compact glass fiber case.

Life raft, inflatable
CO2 inflatable life raft, very light, comopact. No tipping. Easy boarding.

Lopolight
Stand 01.205
C J. Moeller
E info@lopolight.com
T (+45) 32 48 50 30
W www.lopolight.com

Axis ATPC-308 Cleat
Our Axis cleat can be locked into any ATP-8T Tether Point quickly and easily, and then removed when not needed. Raceing sailors can save weight and tie their boats up with out running lines to winches, or stanchions. When out for a regatta - leave 'em on the dock. Cruisers can keep their decks clear and avoid toe-stubbing hardware while preserving a clean and stylish deck. Large enough to tackle two spring lines on top of each other because there is no reason to save weight or space with a little cleat if it can be removed when not needed. Our design is also in keeping with the aesthetics of the ATP-8T, modern with a touch of tradition and our mark of quality. The AXIS Tether Point Cleat is made of Stainless Steel high strength alloy.

Lift Emotion
Stand 10.307
C M. Brandt
E m.brandt@lift-emotion.eu
T +31 0522-242153
W www.lift-emotion.eu

Life Buoy shooting unit
Lift Emotion BV is proud to announce the lifebuoy shooting unit LSU01. Lift Emotion BV has made a special solution for the stowing the lifebuoy and smoke pot on board of ships and Yachts. Where the visual aspect of ships and yacht are getting more and more important it is sometimes difficult to hide a much needed safety item like a Lifebuoy and the attached smoke pot. Lift Emotion has designed a special solution that gives the designer the freedom of placing the lifebuoy out of visual range within the bulwark of the ship / yacht. A other keen advantage of this system is that it can be deployed locally but also on the bridge this way at the time a Man is over board people can deployed the unit from the bridge saving pressures time.

Lorenz Electronics S.n.c.
Stand 01.749
C Lorenz Caselunghe
E info@lorenz-electronics.com
T +390255301870
W www.lorenz-electronics.com

Lorenz weather forecast kit
Chart-plotter GSM weather forecast system

Made 2 Measure Fenders LLP
Stand 03.411
C D. Pattison
E dud@m2mfenders.eu
T +44 845-3379133
W www.m2mfenders.eu

Product
Hand made stainless steel fender bracket measured to fit teak handrail on superyachts and covered with leather and sheepskin to protect the teak handrail. Cam cleat and bullseye/linethru make positioning of fender simple and straightforward. Smaller version also available to hook on guardrail. Ideal for motor yachts 12m-25m.

Makefast Limited
Stand 03.508
C G.A. Williams
E grahamw@makefast.com
T +44 1686-629010
W www.makefast.com

Heavy Duty Deck Fitting
The new heavy duty deck fitting is designed specifically to suit 11/2" and 11/4" tube, with new adjustable end plugs to suit it enhances the current Makefast range. In polished 316 stainless steel and with options on the quick release it offers a unique solution for the larger structures.

Mallory Marine Products
Stand 11.319
C J. Self
E jim.self@mallorymarine.com
T +1 216-6586359
W www.mallorymarine.com

Aftermarket Engine and Drive Parts, Marine Lubricants
Mallory Marine has announced over 200 new items for the 2009/2010 selling season. This is the second new product launch of 2009 for Mallory Marine with the first being over 150 new items in their new Exhaust Manifold program announced in January. This latest new product launch includes many exclusive items not available from other aftermarket competitors including replacement gear sets for Johnson, Evinrude, Mercury, and Yamaha outboards, new additions to their Oil & Lubricants product line, and much, much more. Mallory Marine has established a great reputation for quality aftermarket service parts that are more profitable for the dealership while still supplying a great value for the end consumer.

Manson Anchors
Stand 02.224
C N. Wood
E ned@mansonanchors.com
T +64 9-8350968
W www.mansonanchors.com

Manson Hiding Anchor
The Manson Hiding anchor has been developed to be both a flush fitting pocket anchor with the option of a polished closing plate and also an underhull deployed submarine anchor. The benefits of this design is that it can be deployed via a wetbox from the base of the hull and herewith enhance the clean look on the hull. The Hiding anchor's flukes are narrower than the flat baseplate, which give this anchor the ideal shape for moving in and out of pockets. The Hiding Anchor is Lloyd's Register Type Approved as High Holding Power (HHP) and is available in Galvanised or Stainless Steel to 4300kg.

Manson Racer Anchor
The Manson Racer anchor is the world's first aluminium anchor tailored specifically for racing yachts of all sizes. The Racer is an effective anchor with a great weight saving potential. The anchor is made from high tensile aluminium to withstand higher loads with more resistance, which is ultimately crucial towards weight saving and performance. The anchor is fully welded and is anodized ready for use. The black balls on each side, provide stability and reduce the bar length necessary for setting. The Racer is available in twelve different sizes, depending on the yacht length, and has the added colour feature: deep electric blue.

MANTAGUA
Stand 04.528
C P. Gastoud
E philippe.gastoud@breizelec.fr
T +33 2-98865036
W www.mantagua.fr

Lateral Led Navigation light range
A full 2 and 3 NM range of Vertical Mount LED navigation lights including : port, stern, starboard, combined and Masterhead. Very low power consumption : from 0.8 to 3.2W. Rugged and unbreakable. Input Voltage range : 9-30VDC without external appliance. CE certified.

Maretron, LLP
Stand 01.115
C Larry Anderson
E sales@maretron.com
T +1-602-861-1707
W www.carlingtech.com

N2KBuilder
Maretron's N2KBuilderTM software computer program is available as a free of charge download from Maretron's website: www.maretron.com. N2KBuilderTM is an object-oriented program allowing the user (NMEA 2000® network designers) to drag objects onto a PC screen until the cables, connections, power source, and various devices are shown in an exact layout in blueprint format. N2KBuilderTM tool can determine if there is a mistake in the design and alert the user. If a user is interested in Maretron products specifically the N2KBuilderTM software program not only provides a visual diagram, but can also give a bill of materials with Maretron part numbers.

Maricer
Stand 03.323
C T. Waring
E ted@maricer.com
T +44 1790-753164
W www.maricer.com

Smart Metering & Control
Meter-MACS is a fully integrated, regulatory approved Absolute and SMART metering, monitoring and control solution for remote management, monitoring and control of services and utilities. Employing easy-to-use software and cost-saving technology, Meter-MACS brings a low cost, user-friendly total and secure metering, monitoring and control solution to service and utility providers."

LED Lighting Panels
Maricer have introduced a new LED lighting panel, which can be fitted onto any of their range of marine service pedestals. The LED panels are waterproof to IPX7 and are made entirely from tough, non-corrosive UV stable materials, to compliment the standard Maricer pedestal range. The lighting panels are fitted into a specially moulded head designed to compliment the lighting diffuser used in the standard pedestal range. Each panel contains the latest multi chip white LED's and offer very low power consumption at 0.2 amp each with a 30,000 hour meantime before failure. Up to four panels can be mounted on to the lighting head giving you the option of directional lighting of your choosing on your pontoon system or within your boatyard.

Marlow Ropes
Stand 03.126
C P. Honess
E paul.honess@marlowropes.com
T +44 1323-444444
W www.marlowropes.com

High performnce core for running rigging and Lashings
Marlow will be displaying a new 12 strand rope core made from the latest fibre to be released by DSM Dyneema. The new fibre is 10% stronger than Dyneema SK75 and Dyneema SK78 and is ideal for reducing diameters for applications onboard racing yachts and superyachts. Applications that will benifit from this new Dyneema fibre include running rigging and lashings. Marlow have also put this new rope though its "Max" pre-stretching system reducing the diameter and increasing the strength further.

Mastervolt
Stand 02.321
C M. H. de Groes
E info@mastervolt.com
T +31 (0)20 3422100
W www.mastervolt.com

GPX-5, The Ultimate Hybrid Power Solution
Mastervolt, a leader in electrical products and systems, introduces GPX-5 the ultimate hybrid power solution combining its knowledge of generators, power electronics & power distribution in one box. The GPX-5 is an integrated electrical power system (and/or part of the main electrical propulsion). It contains a variable speed generator, inverter and battery charger. The GPX-5 provides 2x's the continuous power 4x's the peak power of a conventional generator (same size/dims) and improves system efficiency @30% to 40%, saves operating costs and benefits for the environment. With Mastervolt's L-ion battery technology, the GPX-5 is the ultimate hybrid solution with benefits including; system efficiency, reliability and comfort.

GPRS Module
What is new is the way the GPRS Module incorporates into the MasterBus system. This means you don't need multiple analogue connections to monitor a single item, but instead of that you have full control and remote monitoring over your complete system by a simple MasterBus plug & play connection. To avoid complete strangers dialing up your boat, the module can be configured to only respond to 'safe' numbers. In that case, the GPRS Module will not react on commands from unknown people or automatic generated messages. The GPRS Module is fault tolerant. So if you spell the enquiry wrong, such as 'Batery?' the module should know what you mean. If you completely fumble the keys, it will say 'Message not understood.

AC Master 500
The AC Master 500 is the smallest inverter that is able to provide 500W clean continuous output power. The AC Master takes up little space yet offers power to provide many onboard comforts that boaters desire, thus enhancing the boating experience. Its design is esthetically pleasing with simple mounting, easy connections and is constructed with durable materials for the marine environment.

MasterView System
MasterView System displays and customizes your onboard electrical system. MasterView System allows for the communication, monitoring and control of the power products and electrical loads on a single CANbus network, it provides clear, concise, easy-to-operate control and monitoring of the electrical system. The intuitive, full color, visually-rich, interactive MasterView System display, is supported by cutting-edge software that customizes your vessel's electrical system to do what you want, when you want and safeguards against potential hazards providing warnings and alarms. MasterView System enables ship designers and builders to reduce significantly on installation time, cables, space and weight while offering unlimited functionality.

Matromarine Products s.r.l.
Stand 02.517
C V. Gerardo Amato
E info@matromarine.com
T +39 010-9630004
W www.matromarine.com

MARINE EQUIPMENT
Matromarine Products s.r.l is an international manufacturing Company developing and realizing a vaste range of products for marine use. Marketing and distribution is handled via multiple sales companies and independent distributors worldwide. 32 years of experience providing solutions for marine equipment needs to ensure high quality of standards. We are certified ISO 9001. Today Matromarine is producing not only toilets and pumps, but can boast of a range of over 100 articles for pleasure crafts, many of which are bearing the mark and the approval of R.I.NA., according to Solas rules.

McMurdo
Stand 03.402
C Claire Morby
E info@mcmurdo.co.uk
T +44 2392 623900
W www.mcmurdo.co.uk

McMurdo Fast Find 210
McMurdo's ground breaking new FAST FIND 210 Satellite Personal Location Beacon PLB) is the most compact, waterproof and versatile 406 MHz emergency location beacon available on the market today. FAST FIND is a potential life saver, weighing just 5.3oz(150g)and 4.17"(106mm)long. It will fit the smallest pocket or back pack compartment. It can alert professional search and rescue services in the world's most remote locations on land, at sea or in the air. FAST FIND meets all US and EU approvals. It operates on the global COSPAS SARSAT 406MHz satellite communication system and is subscription It has integral 50-channel GPS for accurate location and a unique SOS LED flash light to aid night time rescue.

Metalstyle S.p.a.
Stand 01.740
C Luca Biagi
E info@metalstyle.com
T +390102473990
W www.metalstyle.com

twist
The rotating flush deck fairlead is composed by a polished stainless steel fairlead that disappear by means of a rotation system, studied with a safly mechanism to not aloud fingers damages, up to a flash deck position. This permit to have a completly flat and free view of the deck. The rear part is covered by teak so in this way you have a totally deck view. There is also the possibility to have a led version so to be visible also during night navigation. the rotation system has also a safly mechanism to not aloud fingers damage.

MicroDis S.r.l.
Stand 01.820
C M.Ricciarelli
E m.ricciarelli@microdis.it
T +39 393-9211642
W www.microdis.it

Cleaning and maintenance tools
At METS 2009 Microdis presents two new items of your own range of cleaning and maintenance tools: a fishing net and a squeegee. The new products can be used with the handles actually used.

MIT Labs
Stand 01.820
C F. Falconetti
E f.falconetti@mit-labs.com
T +39 040 361 541
W www.mit-labs.com

MITteak decking
MITteak is a solid teak engineered decking solution, developed and manufactured in Italy, supplying traditional teak decks to the most demanding specifications in lengths, widths and overall performance, whilst meeting the best sustainable environmental criteria with FSC certification. MITteak allows yacht and boat builders to continue the centuries of tradition and maintain Teak as a cost effective deck of first choice.

Moonen Shipyards B.V.
Stand 10.712
C H.W.D. van Hout
E heleen.vanhout@moonen.com
T +31 073-6210094
W www.moonen.com

Refits
WELCOME TO THE WORLD OF MOONEN REFITS Moonen is pleased to build a pocket-size superyacht for you, any time. However, if you choose to upgrade and prolong the life of your current yacht-whether it's a Moonen or one from another respected shipyard-we are the experts who can refit her to your most demanding specifications. Naturally, with 20 years' refit experience and more than 15 major refits to our credit, we welcome you and offer the same modern facilities, designers, engineers, skilled craftsmen, and expert methods as we offer our respected newbuild clients. We have two facilities where we do refits: 's-Hertogenbosch, for yachts up to 30 metres, and Groot-Ammers for yachts up to 50 metres.

Motorcats Ltd - FloMAT
Stand 03.216
C V. Aspey
E sales@mcdecking.com
T +44 1243-430892
W www.flomat.co.uk

Non-slip waterproof matting
FloMAT is a quality PVC matting product originally developed as a practical alternative to carpet or decking for any watercraft. Extremely hardwearing and long lasting, FloMAT is easy to install without adhesives and is suitable for a wide range of interior and exterior flooring applications. FloMAT is non-slip and waterproof, therefore ideal for slippery, high traffic and wet areas. It's highly textured surface minimises the possibility of slipping and falling, thereby improving safety; and it's cushioning properties provide heat, sound and shock insulation, and comfort underfoot. Manufactured from PVC, resin and aerated rubber, this quality composite flooring is shock absorbent, non-flammable, mildew and weather resistant.

MUSTO LTD
Stand 03.317
C Amy Smith
E customerservices@musto.com
T +44 (0)1268 491 555
W www.musto.com

Active Base Layer
Nakashima Propeller Co., Ltd.
Stand 05.506
C M. Nakada
E m-nakada@nakashima.co.jp
T +81 8627-95111
W www.nakashima.co.jp

Nakashima Leisure Propeller
Nakashima’s standard propellers have excellent differences! There are nine types of standard propellers. We are setting one kind of two blade propeller and four kind of three blade propeller and four kind of four blade propeller. What does make our standard propeller so excellent? It is the specifications. The specifications are higher level than other standard propellers. We adopt NACA on blade section and high skew. NACA blade section effective at any speed range and high skew reduce vibration. These are high technologies and achieve high performance. Choose our propeller and share pleasure!!

Nakashima Vietnam Company
We built Nakashima Vietnam Company since 2005 as our first production base. Nomura works, our first production base, produces small-sized propellers from 2007. Dinh Vu works is our second production base built in 2009, it manufactures middle-sized propellers. Nomura works is our main small-sized propeller factory to export propeller to Europe and The United States. We have provided propellers manufactured in Nakashima Vietnam since 2007. Now, we can serve the best qualified propellers worldwide from Japan and Vietnam. The production is in Vietnam and Sales & Design department are located in Japan. We have a confident that our new oversea production provides optimal propellers to the world leisure boat market.

Nautische Veröffentlichung Verlagsgesellschaft mbH
Stand 04.127
C H. Scheidt
E info@nv-verlag.de
T +49 4642-92460
W www.nv-verlag.de

New Brand
Nautical Publications (Arnis, Germany) - For years, cruisers and professional captains navigating through the Bahamas, Puerto Rico, and the Virgin/Leeward/Windward Islands have enjoyed the superior layout and detailed surveys contained in the Caribbean Yachting Chart sets. CYCs, now branded as NV. Charts continues the tradition and now share the same look and name as their European counterparts. Each set is presented in a user friendly format with consistent colors and graphics while navigating from region to region. Harbor & Anchorage booklets are included for some popular areas and each set comes with a CD of digital charts and software for PC navigation.

New Coverage Areas
NV. Charts has expanded with new coverage into U.S. waters. New products chart the east coast of Florida in two sets and are perfect compliments to connect cruisers to the NV. Charts for Bahamas. NV. Charts are the only comprehensive chart sets with independent surveys extending Florida to Grenada. NV. Charts Region 8.1 Florida - Northeast - Fernandina Beach to Lake Worth. 4 passage charts and 41 coastal charts in paper and digital. NV. Charts Region 8.2 Florida - Southeast - Lake Worth to Key West. 4 passage charts and 37 coastal charts in paper and digital. Both contain GPS charted waypoints and approaches, recommended courses, tide tables and a 42 page Harbor & Anchorage booklet.

New USA Office Location, Newport, RI
Nautical Publications has recently moved its USA office to Newport, Rhode Island. Moving to the historic yachting center has improved both warehouse capabilities and distribution efficiency. Nautical Publications 85 Thames Street, Newport, RI 02840 NV. Charts are available at popular marine stores today.

Nautix Marine Paints
Stand 01.623
C V. Bernard
E v.bernard@nautix.com
T +33 2-97653269
W www.nautix.com

Antifouling A88
Nautix A88 is a new technology high performance antifouling. Nautix A88 is a very high strength formula adapted for hot water coastal or trans-ocean sailing over any type of vessel. The selection of specific methacrylic copolymer formulated in conjunction with the exclusive CLR technology by Nautix of controlled leaching rate, result a long term selective, systemic and preventive action over the largest scope of fouling. The control of the antifouling leaching rate meets Port Authorities requirements of limiting impact of paints in water. Nautix A88 benefits from this technology. Most of biocide content can be collected during the annual careening.

Navico
C E. Elliot-Cannon
E emma.elliott-cannon@navico.com
T +44 (0) 1794 510130
W www.navico.com

Navico Broadband Radar (BR24)

Navionics S.p.a.
Stand 02.432
C Barbara Vannozzi
E mobile@navionics.com
T 0039 0584 329111
W www.navionics.com

NAVIONICS
Navionics for mobile is an application developed for iPhone which has been enhanced, during the current year, from a proof of concept to a very competitive navigation device. Navionics for mobile application extends the boating experience beyond the boat, in fact, while before only few navigation functions where accessible, now the enjoyable and easy chart information has been enriched and expanded to the Social Network world. Navionics pocket sized cartography allows you to share your experiences in real time sending routes, tracks, photos, markers per email or posting them directly on Facebook. Navionics for mobile represents the next revolutionary step towards a higher level of situational awareness.

Ocean Data System
Stand 04.415
C C. Lassegue
E info@oceandatasystem.com
T +33 2 97 87 92 65
W www.oceandatasystem.com

UpSideUp
UpSideUp is a powerful system encompassing a wide range of features to ensure the safety of the boat and crew. The main feature of UpSideUp is the anti-capsize function however there is selection of various other functions available. UpSideUp is a modular concept therefore the anti-capsize unit can be readily and easily expanded to a full function system including: •Anti-capsize. •Anti-dismasting. •Sheet and rig load supervisor and limiter. •Heel limiter. • Multi-alarm manager. •Individual custom made functions. From a small catamaran to a super yacht, for racing or cruising, sailing single-handed or with a full crew, UpSideUp is an innovative and efficient sailing and safety feature. Once tried it will fast become indispensable onboard.

Anticapsize and multifunction security system
UpSideUp is a powerful system encompassing a wide range of features to ensure the safety of the boat and crew. The main feature of UpSideUp is the anti-capsize function however there is selection of various other functions available. UpSideUp is a modular concept therefore the anti-capsize unit can be readily and easily expanded to a full function system including: •Anti-capsize. •Anti-dismasting. •Sheet and rig load supervisor and limiter. •Heel limiter. • Multi-alarm manager. •Individual custom made functions. From a small catamaran to a super yacht, for racing or cruising, sailing single-handed or with a full crew, UpSideUp is an innovative and efficient sailing and safety feature. Once tried it will fast become indispensable onboard.

The new Canting Keel Manager by Ocean Data System
In the past 2 editions of the Vendée Globe, Ocean Data System has equipped the 60'IMOCA with its KeelControl solution. Today the new security requirements and performance of the boats has resulted in the design of an even more elaborate product, CKM. In addition to handling the standard functions of the keel, it now incorporates smart functions: •Automatic return of the keel to the axis of the vessel in the event of excessive heel. •Automatic tacking manager. •Integration of the target angles to ensure optimum keel position. •Displays instantaneous and target keel angles. •Alarm and safekeeping of the vessel in case of anomaly. •Hydraulic Pump protector. CKM enables also custom made developments to suit any particular vessel requirements.

Ocean Medical International Ltd.
Stand 03.502
C Nicholas Stael von Holstein
E admin@omi2.com
T +34 629 818 826
W www.omi2.com

OMI Telemedicine Package
The easy to use device transmits real time vital medical information to a fully manned medical service. The OMI telemedicine unit is user-friendly, requiring minimal training, and utilises state of the art technology. Functions include full diagnostic 12-lead ecg, blood pressure, blood glucose, pulse oximetry, and temperature measurement. Packaged in a rugged tablet, The Safe Triage System, developed by medical professionals for use in air ambulance helicopters, has been customised specifically to OMI specifications for use on superyachts; the device was simplified to be used by non medical professionals.

Medical & Kits & Equipment - Telemedicine- Safety
The Ocean Medical telemedicine unit developed by Safe Patient systems is user-friendly diagnostic measuring device, requiring minimal training, and utilises state of the art technology. Functions include full diagnostic 12-lead ecg, blood pressure, pulse oximetry, and temperature measurement. All packaged in a rugged tablet, which features an ingress protection rating of 67 (IP67), meaning it's sealed against dust and has been water immersion tested for 30 minutes at a depth of one meter. The Safe Triage System, developed by medical professionals for use in air ambulance helicopters, has been customised specifically to OMI specifications for use on superyachts; the device was simplified to be used by non medical professionals

Ocean Safety Ltd.
Stand 03.304
C Holly Callus
E info@oceansafety.com
T +442380720800
W www.oceansafety.com

Ocean UltraLite
The Ocean UltraLite liferaft utilizes carbon composite technology to achieve an amazing 30% weight reduction. This new fully compliant ISO liferaft range with less than 24hr pack, means that a 10 man canister liferaft now weighs little more than a traditional 4 man valise. This next generation of liferafts offers the obvious benefits of a light weight solution for yacht designers but most importantly larger liferafts are now easier to handle and deploy. The UltraLite achieves this incredible weight saving by using a carbon canister and a carbon fibre wrapped aluminium cylinder.

OceanLED Ltd.
Stand 03.312
C Laura McMahon
E info@oceanled.com
T 02476 371700
W www.oceanled.com

Liet
LIET is the world's most highly advanced, high output LED lighting collection. The first LIET models to be introduced to the range are LIET3 and LIET6. Both feature unrivalled efficiency when compared to standard halogen bulbs and leading LED products. A key driving force behind OceanLEDs LIET project has been the desire to achieve correct colour temperature of the light produced. The result of which is seen in 3 different LED colour temperature options and a range of colour correction filters. Each light is housed in an attractive polymer body that is just 9mm thick yet incorporates the light's entire electronic driver circuitry. LIET is set to become the most forward thinking lighting collection of our generation.

On Deck - Imhoff
Stand 01.110
C Jeroen Baggerman
E allhands@on-deck.nl
T 0031 71 331 33 66
W www.on-deck.nl

Day Racing Jacket
The popularity of daysailers has grown enormously over the past few years. These boats are typically lightweight and have little storage space. The traditional foul weather gear is far too heavy and bulky and too expensive for this use. The all new Imhoff Daysailer jacket is light weight, flexible, compactable but still warm, water proof and breathable and thus fulfilling all the needs of the daysailer. The styling is in line with the design trend of the recently introduced daysailers. Imhoff stand 01.110

Osculati S.p.a.
Stand 5.220
C A. AlbertoOsculati
E enza@osculati.it
T +39 02 2699111
W www.osculati.com

Watertight molded plug cable with LED
Osculati enlarge his range of electric parts with the new power cord molded plug. This technology can offer different advantages like complete waterproof, safety, durability, nice looking and an integrated LED light. Available in 16 and 30 Amp and different length from 10 to 25 meter. Heavy duty cable from 11 to 15 mm thickness. Osculati is the first and only producer of shore power connectors in Europe; the blue colour underline that the all range has been developed specifically for the marine market (and not industrial yellow as many competitors)

Pacsoft International Limited
Stand 01-510
C C. Thomas
E Chris@PacsoftMMS.com
T +64 9379-7260
W www.pacsoftmms.com

New Visual User Interface
Pacsoft are proud to introduce MMS-NG, the next generation of "visual" marina and boat yard management user interface, bringing a new and unique simplicity to the operation of the sophisticated operational, accounting and management features needed to manage the marina and boatyard business - the focus on simplicity of business process.

Palladium Technologies, Inc.
C Karen Blake
E mike@palladiumtechs.com
T +1 954-653-0630
W www.palladiumtechs.com

iSiMON
iSiMON works wirelessly around the yacht and dock to provide the captain and crew direct remote viewing of; Engines, Generators, Tanks, Bilge Levels, Batteries, Ships AC Bus, etc. In addition, all alarms in SiMON will appear on the wireless iPhone and iPod Touch providing instant notifications. Not only will the visual alarm notification occur, but an audible siren will sound on the iPod Touch, along with it vibrating. Control functionality has also been added where by simply pressing a button on the touch screen allows for the remote control over, pumps, lights, etc.

Peguet & Cie.
Stand 04.313
C D. Durand
E export@peguet.fr
T +33 4-50955454
W www.peguet.fr

DARK COLOURED QUICK LINKS
After the release of the dark black finishing on zinc plated steel in 2008, the dark coloured finishing is now available on stainless steel Maillons rapides quick links. Based on the same process, the dark black finishing is made of a paint applied directly on the quick link at the very end of the manufacturing process, while leaving the marking fully visible. This finishing provides a useful alternative for facilities requiring non visible rigging in marine fittings, entertainment industry, personal protective equipment (P.P.E), the Defense.

Perfix International
Stand 11.104
C B.J. Veldhoen
E info@perfix.nl
T +31 (0)184 694456
W www.perfix.nl

Q-SNAP (fastener for marine covers)
Exciting news for boatcovers: nothing too tight for Q-SNAP. After every relaxing or exciting boattrip there is the hassle of fixing that boatcover or sprayhood, which is allways just too tight. While struggling your hands get hurt and finally you settle with a few loose fasteners; a true pain that needs to be solved. The solution: Q-SNAP, a secured press-fastener with stretch-function, which is timesaving for covermakers to install. The patented system is just like a normal press-fastener, with 2 additional smart designed parts: a ring underneath the cloth and a gentle hook on deck. This turns the fastener into a secured connection that won't pop loose, while it provides a stretch-function (lever). The cloth is stretched as you fix.

Perfix International B.V.
Stand 11.104
C B.J. Veldhoen
E b.j.veldhoen@perfix.nl
T +31 0184-694456
W www.q-snap.nl

Exciting news for boatcovers: nothing too tight with Q-SNAP
After every relaxing or exciting boattrip there is the hassle of fixing that boatcover or sprayhood, which is allways just too tight. While struggling your hands get hurt and finally you settle with a few loose fasteners; a true pain for every boatlover that needs to be solved. With years of experience in fasteners and a dose of inventivity we bring you the solution: Q-SNAP: a secured press-fastener with stretch-function, which is timesaving for covermakers to install. The patented and stainless steel system is just like a normal press-fastener, which is secured by 2 additional parts, while it incorporates a stretch-function (lever). The cloth is stretched as you fix.

Philippi
Stand 05.206
C Michael Koegel
E info@philippi-online.de
T +49 7146 8744 0
W www.philippi-online.de

Energy management box
The EM-box is the central structural element for the DC installation of a yacht for faster, safer and more eco-friendly charging. Connected to it are up to 3 battery banks, 4 high current consumers, the alternator, the starter motor and wind and solar generators. By means of a touch screen monitor the owner always can keep informed about his DC system. Die EM-box consists of the battery switches, 4 high current fuses, a battery isolator, 3 battery monitors with 8 shunts, a smart regulator and a CAN-Bus interface in order to exchange data.

Phoenix Vibration Controls B.V.
Stand 02.219
C C. Eckebus
E chriseckebus@phoenixvc-bv.com
T +31 0187-493744
W www.phoenixvibrationcontrols.com

stainless steel MES mounts
Phoenix anti vibration MES mounts, are currently also available in stainless steel.

PROBRIDGE GmbH
Stand 10.525
C R. Schlumberger
E info@probridge.de
T +49 4103-803790
W www.probridge.de

watertight monitor with LED backlight
The current SEABOOK monitor version is a completely new development, which has been equipped with the latest LED technology for higher brightness and less energy consumption. In addition a "scroll"-function for easier navigation was added to the mouse functions. SEABOOKs are for hardcore usage and meet the highest demands in respect to water protection and rigidity. The new casing is milled from a massive aluminum block and has dramatically been reduced in size and weight. Features/facts: * Screens in 12",15",17" and 19" * Brightness 1500cd/m² * Brightness control via push-buttons * Mouse function including scrolling * VESA mounting * IP68 classification. For easy handling on board, an even lighter and mobile RACE version is available.
Quality Mark, Inc.
Stand 11.317
C M. Ebbenga
E mark@qualitymarkinc.com
T +1 651-4622513
W www.smartejack.com

Adjustable wheel kit for boat lifts
One person job to move boat lift! Jack adjust up to boat lift can sit flat on ground. Jacks also adjust to help level lift all year. Raise lift with jacks and lift rolls out of water easy in fall. -Made from aluminium. -Fits most boat lifts. -No need to get wet anymore. -Easy one time install. -Rolls easily on all terrains. -18" up & down adjustable. -Aluminium wheel brake. -700 lbs capability.

Boat Seat Release for taper lock pedestal
Now you can remove your boat seat easily with one simple push. No tugging or pulling any more. Seat removal is faster and safer than ever before. A simple step on the pedal unlatches and loosens the seat from the base. Eliminates back strain associated with the seat removal. Whether you are competing in a tournament or out for a leisure family ride you can easily change and rearrange your seat - hassle free! -Fits Springfield (taper lock and Swivel-Eze wedge) seat bases. -Fits 2" and 2-3/8" pedestals. -All stainless steel hardware. -Installs on your existing pedestal in matter of minutes. -Better control and safer removal of seats reducing accidents.

Automatic Boat Loader
Rope-A-Boat automatically launches and loads your boat with the push of a button! -SAFE: No more dangerous"walking the tightrope" to load your boat. No more wading. You stay in the boat while Rope-A-Boat does the work. -FAST: Rope-A-Boat launches and loads in LESS THEN A MINUTE, so you'll spend more time boating and less time and hassle at the landing. -CURRENT AND CROSS-WINDS ARE NO PROBLEM: Rope-A-Boat keeps your boat in perfect alignment with the trailer, even in strong wind and current. -NO MORE POWER LOADING: More and more states are outlawing power loading, because of the damage it does to public accesses. But who wants to CRANK THAT HANDLE on a heavy boat? With Rope-A-Boat, you don't have to!

Collapsible ladder for boat on trailer
Step Right Up! The fast, easy, safe way to get in and out of your trailered boat. -The big, sturdy handle enhances safety; mounts to either side of the ladder. -Heavy-duty ladder folds up and away when not in use. -Three angle adjustments to fit your boat/trailer configuration. -Wide, non-skid steps -Simple to install; all hardware included

Water Depth Sensor for Trailering Boats
Alarm at correct launch depth. Back trailer into water. Locate water line when trailer is at correct depth to launch. Stick sensor on side of trailer frame with adhesive tape at water line. Plug alarm in 12 volt source in tow vehicle (Lighter-Plug). Alarm will sound when trailer is at correct launching depth. Alarm stores on visor when not in use. -Easy to use -Audio alarm -Easy to install -Compact design -Wireless -Battery included

Automatic Boat Loader
Rope-A-Boat launches and loads boats automatically, with the push of a button, to eliminate power loading and hassles at the boat ramp. To load, you simply drive the boat to the trailer where the innovative bow eye automatically engages the Rope-A-Boat system on the trailer. Press a button on the wireless remote and Rope-A-Boat's powerful winch reals in the boat in seconds. To launch the boat, the process is simply reversed, again at the push of a button. Regardless of strong cross winds or swift current, Rope-A-Boat keeps the boat perfectly aligned with the trailer at all times. This is new design for 2009. the winch was designed just for the the Automatic Boat Loader. included with winch is wireless remote, light, wired cored,

Bow Step
"The bow Step is a great addition to your trailer. Whether at a boat launch or driveway, it always is hard to climb in and out of a boat. With the bow step easily walk in and out of boat on a trailer. When at a boat launch, unable to get close to dock or no dock available, with the Bow Step easily board boat while launching. Cleaning boat or preparing to launch it is easy to board boat and no need to climb, with the Bow Step."The fast, easy, safe way to get in and out of your trailered boat. -The big, sturdy handle enhances safety. -Heavy-duty ladder folds up and away when not in use. -Three angle adjustments to fit your boat/trailer configuration. -Wide, non-skid steps. -Simple to install; all hardware included.

Radio Ocean
Stand 01.104
C J. Perriere
E info@radio-ocean.com
T +33556134800
W www.radio-ocean.com

RO4800
The RO4800 includes the aim functions that are needed on boat on a SINGLE unit: - VHF function - DSC function (Digital Selective Calling) - AIS receiver function - A single antenna necessary for the VHF and AIS functions - Connect the VHF directly to a plotter or a PC - Back lighted display and keyboard (8 levels) - Back lighted alphanumeric handset - MOB ready

Raymarine plc.
Stand 01.111
C Fiona Pankhurst
E info@raymarine.com
T +44 2392 693611
W www.raymarine.com

E Series 'HybridTouch' multifunction display
Raymarine's new 'touch of genius' - Touch screen and keypad control with dual charting options gives users best of both worlds with new E Series Widescreen. Touch screen or keypad operation? Jeppesen Marine or Navionics cartography? Now users have a choice of charts and flexibility in operating their new navigation display, thanks to the ingenuity of Raymarine's new E Series Widescreen on show at this Autumn's boat shows. E Series Widescreen is the company's most flexible, technically advanced, and easy to use multi-function navigation display to date, with bold new styling offering the maximum ultra-bright image and size for its footprint. Raymarine now offers the choice of operating options with the introduction of HybridTouch ™.

HD Digital radome
Radar target detection has undergone massive evolutionary changes in the last year, thanks to the introduction of High Definition Digital technology. Now the superior benefits of these new systems are available to more boaters, with the launch of Raymarine's new HD Digital radomes. These high power 4kW transmitters provide superior target detection and resolution. Whereas other systems often merge rain and targets, the HD Digital radome system has the capability of distinguishing targets even in heavy rain clutter. HD Digital radomes also come with bird mode to help fishermen detect fish shoals by tracking sea bird movements, and high speed radar scanning (automatic 48rpm mode) for optimal tracking of fast moving targets at short ranges.

ST70+ large format displays
Raymarine's ST70+ new generation of instrument and pilot display systems, designed for sail and powerboats over 12m (40 feet), offers a new way of displaying and managing data, with a large 164 mm (6.5") fully waterproof high-definition colour LCD display. The ST70+ is fully waterproof to IPX6 standard, making it ideal for mounting externally. The extra large display ensures it can be seen on a mast or bridge. It can be surface, flush or panel mounted, and the sunlight viewable display is further enhanced thanks to its backlighting options. Users can choose from red or white backlighting, and for additional clarity can select inverse text - white characters displayed on a black background; a number of other colour options are available.

Reverso Pumps
Stand 02.220
C John Napurano
E info@reversopumps.com
T 954-522-0882
W www.reversopumps.com

Outboard Engine Oil Change System
DRAIN AND FILL WITHOUT A SPILL: Reverso GP-311PW: 4 Stroke Outboard Engine Oil Change System Larger four-stroke outboards can now have oil changes while the boat is in the water, making an awkward hand pump task obsolete. A durable, dependable, 12 volt gear pump allows for draining and filling engine oil via the stainless service wand through the dip-stick tube. This method helps eliminate ecology-damaging oil spillage. Hoses and power cord are included, and the unique mounting base allows the unit to hang from the cowling or other convenient locations. The ISO 8846/ SAE J1171 certified pump also carries IP 65 ratings. A simple on/off/on fused control switch provides for accurate precise operation. Suggest list price is US$399 / 279 Euro.

Portable Oil Change System
GP-311P
This strong and portable gear pump functions ideally for oil changes and large outboards, but is practical for other service applications as well. Oil changes can be conducted even without the need to haul the boat. The compact design provides the convenience of hanging it in the service area for simple access. Flow Rate 2.1 GPM (8 LPM). 12V or 24V DC. Comes with 5/16" dip tube adapter.

Ronstan
Stand 04.303
C Kylie Wilson
E office@ronstan.com.au
T 61 3 8599 0000
W www.ronstan.com

Series 25 T-Track Composite Jib Lead Car
Ronstan T-track jib cars for small keel boats & sportsboats. 2-piece moulded car body delivers low friction on alloy track; without separate inserts. High strength without the weight & corrosion drawbacks of metal parts. Dyneema® Link provides articulation between the Orbit Block™ & car and is 10x stronger & lighter than steel. Elastomer ring replaces the heavy traditional stand up spring. Integrated becket suits 2:1 sheet systems & a threaded pin allows easy fitting of alternate blocks. Contoured car eliminates line snagging and flush stop button allows easy one-handed adjustment. Arrow located on car side to indicate stop position for repeatable settings. New 'Racing' track has 25mm stop spacing for precise car positioning & sheet angle

Sailmaker International S.r.l.
Stand 05.341
C Alberto Fiorenzi
E cc.si@fiorenzi-marine-group.eu
T +39 0717392040
W www.fiorenzi-marine-group.eu

IOS
The most innovative textile for every covermaking application! This cloth appears to be a traditional textile, its weight is only 150 gms/sqm and if you pull it in the two primary directions it will surprise you with its tenacity. However if you pull it in the bias direction you'll discover that it does elongate significantly, returning to its original shape once the fabric is released. Those who make covers everyday will know how this characteristic speeds up thework. • Ios is virtually unbreakable, 5 times the tear resistance of traditional products •Ios if stitched will seal the hole making the stitching waterproof • Ios has a water column 1200mm. Ios is the perfect product, it's another FMG innovative superstar!

San Giorgio S.E.I.N.
Stand 01.834
C Andrea Menconi
E info@sangiorgiosein.com
T +39 0108301222
W www.sangiorgiosein.com

UNS10194
San Giorgio SEIN's UNS10194 is an attractively styled and highly cost-effective data monitoring system that gives discerning users a powerful control interface to all of their boat's monitored functions. The system's flexibility makes it a good choice for boats of all sizes and is engineered to provide a wide spectrum of functionalities. The device was designed to accommodate any kind of direct sensor and other inputs without the need for intermediate signal converters or translators. This unique feature has an great impact on material and installation costs, allowing typical savings thanks to the elimination of redundant devices, including PLCs, and much shorter commissioning times.

ECOMETER
The ECOMETER is a user-friendly, inexpensive and compact Ø85mm analogue gauge with combined 1.5 graphic LCD and most of all the only instrument in the market that calculates realtime boat efficiency (ratio speed/consumption) and suggests the most efficient speed. Acquiring speed data from GPS and engine parameters from the ECU, and thanks to its self calibrating function, the ECOMETER can display: ¦ Instantaneous efficiency in litres per mile (on the analogue dial as well as on the graphic LCD) • Up and Down hint arrows that suggest to increase/decrease rpm • Speed in knots per hour • Instantaneous consumption in litres per hour • Trip consumption in litres resettable • Total consumption in litres un-resettable

San Jose Technology, Inc. (Sanav)
Stand 09.711
C Michelle Yu
E michelle.yu@sanav.com
T 886-2-2269-4456
W www.sanav.com

AIS (Automatic Identification System) Devices
SANAV provides safe and reliable AIS key components by integrating a dual channel VHF transceiver and GPS receiver. It is designed to broadcast its own vessel's position and receive the position data from the surrounding vessels in order to prevent collisions.

AIS Receiver / Cost-effective dual channel VHF receiver
We're a reputed manufacturer and exporter for AIS Receiver Products. We offer our customers good quality with competitive prices AIS Receivers that match the strict quality requirements of International Standards. This has earned our company the distinct reputation of being a quality-oriented manufacturer for AIS Receivers. We are recognized as one of the leading supplier in this sector. MODEL: AIS-2
AIS-2 is a cost-effective dual channel VHF receiver designed to receive and decode transmissions from vessels fitted with Class B AIS transceiver.

Marine VHF Antenna
EHN-101 is VHF antenna especially suitable to marine application. Customization and OEM projects are welcomed. Please contact us for more information. Features • Equipped with 2-channel AIS transceiver • Embedded with GPS receiver • Equipped with GPS antenna. Applications: • Improved safety • Collision avoidance

AIS-700 transponder /AIS, Marine, Class B, safety, Transponder
AIS-700 is a cost-effective, high performance Class B transponder. The dual channel VHF transceiver is designed to receive and transmit information from vessels fitted with AIS. It is particularly suitable for leisure and professional use of smaller vessels. The information that is transmitted includes: MMSI Number; Name of vessel; Call Sign; Type of Vessel; Position; Speed (SOG); Course (COG); Navigational Status; Vessel dimension. Features: (1) Equipped with 2-channel AIS transceiver; (2) Embedded with GPS receiver; (3) Equipped with GPS antenna; Applications: (1) Improved safety; (2) Collision avoidance; (3) Harbour monitoring and tracking of vessels;

Saumag Sarl
Stand 04.419
C M. Sauget
E sauget@deltavoiles.com
T +33 2-97558077
W www.storm-bag.com

STORM-BAG ®
The STORM-BAG ® is a twin fold storm jib set above your your furled genoa, offering a very high efficient sail. But first, it’s a very simple, quick and safety way to install a storm jib: Set the bag around your forestay like a saddle. ONLY 3 SHACKELS TO LOCK, one for the tack line (included), one for the halyard, one for the sheets (included) and the STORM-BAG ® is ready to be deployed straight from its bag. Go back with the sheets; Now you can easily hoist the STORM-BAG Á® from your safe cockpit, when you want.

Scanstrut Ltd.
Stand 03.504
C H. Brown
E hannah@scanstrut.com
T +44 1803-863800
W www.scanstrut.com

Scanpod - Instrument Mounting Pod
Following a long tradition of producing innovative, market leading, products Scanstrut are once again adding to their already extensive range. The exciting new range of instrument pods takes a fresh look at the challenge of installing chartplotters or radar displays, onto power or sailboats. The Scanpod series is concise and well designed, allowing the simple installation of all leading brands of instruments. Manufactured for both sail and powerboat installations, the range offers contemporary styling, choice of colour (high gloss white or silver) and a unique seal and fixing system which provides full instrument protection and offers you the very highest quality installation on the market.

Scanpod
Following a long tradition of producing innovative, market-leading products Scanstrut are once again adding to their extensive range. The exciting new range of instrument pods takes a fresh look at the challenge of installing chartplotters, radar displays, and insturments onto power or sailboats. The Scanpod series is concise and well designed, allowing the simple installation of all leading brands of instruments. Manufactured for both sail and powerboat installations, the range offers contemporary styling, choice of colour (high gloss white or silver) and a unique seal and fixing system which provides full instrument protection and offers you the very highest quality installation on the market.

Seakeeper
Stand 10.203
C A.Semprevivo
E asemprevivo@seakeeper.com
T +1 410-3261590
W www.seakeeper.com

M21000 Gyro Stabilizer
Seakeeper's new M21000 gyro is perfect for larger yachts and vessels. Able to actively stabilize most vessels with displacements up to 90 tons, the M21000 is the perfect choice for discerning owners wanting a complete stabilization system that works equally well at zero-speed and at anchor and also while underway. For larger vessels, multiple units can be installed to achieve the desired stability characteristics.

Sea Marshall
Stand 03.131
C C. Greetham
E sos@seamarshall.com
T +44 1377 219560
W www.seamarshall.com

Personal Locator Beacon
The new Sea Marshall® AU9 digital long range tracking personal locator beacon. The new Sea Marshall® AU9 is a low cost, high performance personal locator beacon designed with 30 years experience of marine safety and knowing what works and what saves lives.

Sea Sure
Stand 01.355
C G. Brown
E grahambrown@sea-sure.co.uk
T 00 44 (0) 1489 885401
W www.sea-sure.co.uk

"Slick Release" Tiller Extension Fitting
Simple design, innovative features and state of the art materials give the "Slick Release" secure holding of the tiller extension on the tiller whilst still maintaining its "simple to remove" objective. Features: "Click and Closed" The ingenious and innovation design utilises the tiller extension joints "rubbery" properties to get a positive and secure "click and closed" locking feature. "Total Capture" The tiller extension joint is completely captured within the fitting. "Exit Ramp" Opening the fitting reveals an internal "Ramp" to enable easy removal when required. "No Snag Design" The fitting sits snug on the tiller with no overhangs or under-cuts to snag lines.

"Universal" Performance rudder stock
The "Universal Rudder stock" has been developed so that smaller boat builders can have access to a performance level rudder stock without having to compromise boat design. The stock uses an innovative top pintle which is on "Rails". This is to maintain alignment with the lower gudgeon. When in position the "Lock and Swage" system ensures that a rigid fixing is achieved. The stock is also fitted with the "Drop nose pintle" which received a DAME nomination last year (2008). Released earlier this year, the stock is already in use throughout the world and has rapidly become a commercial success.

"Assymetrix" Sail Control & Reefing Block
As sails and sail handling techniques develop and change so do the blocks and control equipment used have to evolve to meet these new and often demanding needs. The Sea Sure "Assymetrix" sail control and reefing block range is a perfect example of this. For use in either mainsail reefing or on headsail "Cunningham" systems the blocks sit neatly on the sail so as not to introduce excessive twist in the leach when loaded up. Produced from heat treated aircraft grade aluminium and with an ultra hard anodised finish the blocks are both durable and hard wearing. The sheave system incorporates a tight packed carbon needle roller bearing, similar to that used in the more familiar Sea Sure range of Clew Reefing blocks.

Sea Vision by Underwater Lights Europe
Stand 10.405
C M. Jardine
E mjardine@seavisioneurope.com
T +33 497-210296
W www.seavision.com

SV37 - 250 watt HID metal halide underwater light
The Sea Vision SV37 weld-in underwater light has a 98mm aperture lens and utilizes a 250 watt HID metal halide lamp. This makes the SV37 the most powerful underwater light available anywhere, with the largest volume of light. This fixture is designed primarily for yachts of 60 metres or over. The lights can be welded at adjustable angles to suit all hull shapes. It also has an intricate cofferdam that is welded to the thru hull, providing an easy way for shipyards to satisfy the demands of classification societies for secondary containment of the lights. Some further figures: Lumens: 20,000; Kelvin clour temp.: 8,000.

Seawax Marine Coatings
Stand 04.416
C Patrick Frangoulis
E infos@seawaxmarinecoatings.com
T 00 33 ( 0) 6 03 31 93 82
W www.seawaxmarinecoatings.com

SEAWAX Fouling Release
SEAWAX Fouling Release has been developped manufactured and patented by Seawax Marine Coatings. This product is presented for the first time to the international market ay METS. Seawax Marine Coatings also presents a new primer for anti fouling paints that is a water based formula, mono component unless traditional epoxy paints. This primer has the particularity to remain flexible after having been applied: it can absorb slight hulls/materials dimensional variations without breaking. It allows the hull to be kept in perfect waterproof condition.

ecological anti fouling
Seawax® Fouling Release is an ecological anti fouling paint containing no biocides, no metallic salts, no silicons. It is compatible with any kind of hull (metalic or not) and is combined with SEAWAX® PRIMER, a mono component primer able to absorb small size variations without breaking. Easier to use than tradtionnal anti fouling, it has a faster drying time, is safe for workers and sealife, and doen't need special care when using it, transporting or storing it. Due to the fact that is has no metalic particulates, it doesn't induces additional electrolysis risks. Because it has no silicon, repairs on a hull can be carried out, the product can be removed from hull easily.

Seijsener Rekreatietechniek B.V.
Stand 01.813
C B. Durieux
E bas.durieux@seijsener.nl
T +31 075-6810610
W www.seijsener.com

Arctic service pedestal
The new Arctic service pedestal stands out because of its compact design, while still being able to host a lot of service possibilities. It's slender design makes the Arctic the perfect compact addition to Seijsener's pedestal range. Main characteristics: • Built-to-last thanks to it's sturdy housing, made of extruded aluminum; • Co-extruded fast assembly sections make for a minimum of installation time; • Only little space required (dimensions 160 x 100 x 800mm), • A multi-purpose service pedestal (fit for power outlets and water tap but also as lighting device or safety station) which contributes to the uniform appeal of a marina.

SP-99 Pump-Out system
Seijsener Marina Services makes the next step in blackwater pump-out systems with the introduction of the SP-99 pump-out system. The SP-99 allows a marina to have drainage points at the place where their guest expect them to be: close to their berth. They don't need to sail to a seperate pump-out unit anymore. After lifting a little hatch in the jetty deck near their berth, they can take out a suction piece with a flexible hose. After plugging it in the output connection of their ship's blackwater tank, they can pump out their blackwater easily. The SP-99 is the clean and quick solution for the pump-out needs of any marina!

Selmar Technologies S.r.l.
Stand 01.830
C S. Agate
E s.agate@selmar.it
T +39 0923-721408
W www.selmar.it

R.O. Watermakers/Waste Water treatment systems
Selmar Technologies has been working since 1984 in the water treatment field focusing its efforts on the design and production of reverse osmosis desalinators for marine, nautical, civil, military and industrial use. Besides R.O. Watermakers and its accessories, today SELMAR brand includes also waste water treatment systems homologated with the EC TYPE-EXHIMANIATION CERTIFICATE released by Det Norske Veritas DNV in conformity with the IMO MARPOL Res. Mepc. 159 (55) and in accordance with the European Directive 96/98/EC (MED) and centrifugal water/oil separators specifically designed for nautical and marine application. SELMAR is certified by Det Norske Veritas in conformity with the international standards ISO 9001:2000

Shanghai Jilong Plastic Products Co. Ltd
Stand 05.421
C G. Di Moro
E giorgio.dimoro@jilong-europe.com
T +39 06 96526823
W www.jilong-europe.com

Pathfinder Kayak & Super Pathfinder Kayak
Easy to operate, portable, quick to assemble and inflate, quick to pack and store. Super-Pathfinder Kayak series features Strong robust materials. Extra comfort is assured thanks to heavy duty seats; heavy duty paddles guarantee strenght and durability.

Z-Ray 4 series
Z-RAY SERIES 4 is a robust economical inflatable boat, ideal to be used as a tender or general sports run-about. Counting on a professional structure (3 separate air chambers on sturdy hull, 1 air chamber on keel and 1 on floor, Marine plywood used for motor transom, V-shape inflatable keel, Operable Drain valve, Protective Strake on the keel and Built-in Oarlock system for easy rowing) Z-RAY SERIES 4 features an inflatable floor with an integrated inflatable keel. It is light, simple to inflate and deflate to be packed away. Its compact dimensions allow easy transportation and storage.

Z-Ray 3 series
Z-Ray Serie 3 is a yacht tender, a pleasure cruiser and a fishing boat. The high pressure Air Deck floor provides to this boat rigidity to the hull and ensures comfort for the occupants. Counting on a professional structure (3 separate air chambers on sturdy hull, 1 air chamber on keel and 1 on deck, Marine plywood used for motor transom, V-shape inflatable keel, Operable Drain valve, Drop Stitch fabric air deck and Built-in Oarlock system for easy rowing) the quick to assemble & inflate Z-Ray Series 3 is a light but robust performer convenient to carry and pack.

Z-Ray 2 series
The brand new Z-Ray Series 2 offers outstanding stability thanks to its rigid aluminium flooring and V-Shaped inflatable keel. Counting on a professional structure (3 separate air chambers on sturdy hull and 1 air chamber on keel, Marine plywood used for motor transom, V-shape inflatable keel, Operable Drain valve, Aluminum floorboards and Built-in Oarlock system for easy rowing) the new Z-Ray Series 2 offers excellent handling and assures all round enjoyable boating experience.

SILPAR TK S.n.c.
Stand 05.216
C C. Bologna
E silpar@silpartkline.com
T +39 011-7795717
W www.silpartkline.com

Products
Gelcoat Spray
Gelcoat Retouch Spray.
High density special paint, in a handy spray can, for quick touchups of glass-reinforced plastic areas treated with gelcoat and polyester resin. It gives a perfect, quick and even coverage, and doesn't drip.

Shine
Polishing Protective.
Polishing product, avocado oil based, to renew leather, plastic, wood and all painted surfaces. It makes all treated areas look like new, protected from salinity sparkle and like new the treated parts, protecting them from salinity, pollution and atmospheric agents.

Sinergex Technologies
Stand 01.231
C Adam Heindorff
E sinergex@comcast.net
T +8013680034
W www.sinergex.com

Sinergex Fusion Inverter/Charger
The Sinergex Fusion Inverter/Charger combination units are some of the most advanced power conversion products available today. Fusion is a highly efficient true sine wave power inverter and an intelligent 4 stage battery charger within one unit. Fusion's advanced features include Power Assist, Multiple Unit Parallel Connection, Operation Memory Recorder, Fully Programmable Temperature Controlled 4 Stage Battery Charger, Advanced LCD Control Panel, Neurtik Power on AC Terminals, PowerSaving Mode, harsh Environment Protection: PCB Protective Membrane. Fusion's unique advanced design makes it the smallest and lightest inverter/charger of its type available on the market. Fusion is available in 1500 and 3000 watt models.

SMAR-Azure Ltd.
Stand 03.322
C S. Malpede
E sabrina@smar-azure.com
T +44 131-6107627
W www.smar-azure.com

AZURE-Agent
AZURE-Agent is a software application for use by sales agents or people in charge of measuring sailing boats. Thanks to its friendly graphical user interface, AZURE-Agent allows users to enter the correct Rig/Boat measurements and include any additional information. Once the information is entered, AZURE-Agent produces a realistic rig design. Measurements are saved in a file that can be sent to the designer. Then he/she can immediately develop a sail design that is consistent with the rig ’s features. AZURE-Agent can prevent errors caused by misleading measurements. Main features: -Clear form based application, -3D view of Rig and Hull, - Prevent save file with incomplete info. As a result, sail design will be faster and simpler.

AZURE-Vision
AZURE-Vision is a software tool that allows sailors to visualise newly designed sails in a 3Dimensional active window. AZURE-Vision can be installed on a pc or laptop and made available to sailors by the sail-designer. In this way the sailor can open the file sent by the designer and see the new sail design directly. The sailor will be able to visualise the renderings of the sail plan, including panel layout, patches layout, reefing points, battens, draft stripes, telltales, rig and hull. AZURE-Vision can also display sail-shapes optimised using AZURE-Project, by adding in pressure maps and flying sail-shapes. AZURE-Vision simplifies and improves communication between sail designers and sailors, therefore enhancing customer satisfaction.

Soromap Yachting
Stand 04.305
C W. Thomas
E export@soromap.com
T +33 5-46458500
W www.soromap.com

Mast, Rigging, Paints, Anodes, Coating, Maintencance, Sails
Soromap has been specializing for more than 30 years in the design, production and distribution of specific products for the yachting, pleasure craft and furniture industries. activity is centred on four areas: -Masts and riggings -Sail making and covering -Painting, cleaning, maintenance products and Zinc anodes -Varnishes

SP the marine business of Gurit
Stand 01.411
C Katie Currie
E gurit@gurit.com
T 0044 (0) 1983 828000
W www.gurit.com

M foam
Corecell M-Foam is a new, unique structural foam, for use in sandwich structures in Marine applications. Existing foam materials have always specialized, with properties offering advantages only in some applications. Some products have high specific properties such as shear strength, some have high toughness through high shear elongation, some are compatible with prepreg processing and some are suitable for infusion processes due to low resin uptake. Corecell M-Foam is the first core that combines all of these properties into one product at a low density.

Spectra Watermakers Inc.
Stand 09.605
C FPFabio
E europe@spectrawatermakers.com
T +1 415 5262780
W www.spectrawatermakers.com

Farallon 1800/2800
Spectra Watermakers Inc. announces the Farallon 1800 / 2800
utilizing the revolutionary, high efficiency, Spectra Pearson Pump
The Farallon 1800 will produce 75 gallons (284 liters) while the Farallon 2800 will produce 120 gallons (442 liters) of pure, fresh, excellent tasting water per hour on very little energy. Spectra has again made a major break thru in energy efficiency with the Spectra Pearson Pump™.

Spinlock Ltd
Stand 03.300
C James Hall
E info@spinlock.co.uk
T +44 (0)1983 295555
W www.spinlock.co.uk

Spinlock Zero
The Spinlock Zero is the first buoyancy aid to be designed especially for performance keelboat sailors, targeting the particular needs of this competitive and fast-growing group. In this exciting new development, the Zero combines articulation and a slim profile with unique ventilation features, creating a low-bulk vest for the Sportsboat sector. A fresh approach to the design and ergonomics of the product allows the Zero to be worn like a close fitting performance garment. Ultra stretch neoprene panels allow free articulation whilst the body fit adjustment ensures a streamlined fit for any shape of user. Revolutionary new venting and fast-draining features increase breathability and comfort as well as preventing water overloading.

Stainless DownUnder
Stand 02.136 Zuid Hall
C A. Lilly
E andrew@stainlessdownunder.co.nz
T +64 7549-2777
W www.stainlessdownunder.co.nz

Stainless Curved Slider
Stainless DownUnder are proud to present to industry the complete package solution direct from the manufacturer for curved and flat stainless sliders. Our curved slider features the latest touch screen and drive gear technology. Polished with our signature mirror finish and customized to your individual tastes yet competitively priced, we offer quality without compromise.

Standard Horizon
Stand 04.541
C D.N. Croome
E marinesales@standardhorizon.co.uk
T 0044 1962 866667
W www.yaesu.co.uk

HX760E Bluetooth Floating Marine VHF Handheld
STANDARD HORIZON HX760E AND BH-2 BLUETOOTH® HEADSET
First floating handheld VHF with functional hands-free Bluetooth ® headset (BH-2) gives true hands-free operation since it's capable of VOX (voice operated transmit) operation where simply speaking will switch the set to transmit. Stop speaking and the set returns to receive mode. The headset can be manually switched by pressing the PTT (press to talk) button too. The BH-2 headset has a range of up to 10 metres (30ft) from the handheld allowing freedom of movement around the boat.The light, ergonomically-shaped handheld has power output of up to 6W which is provided by a long-lasting lithium-ion battery,rated to IPX7, audio power is a loud 700mW.

Stress Free Marine
Stand 04.102
C D. Forster
E sales@stressfreemarine.com.au
T +61 407 717 900
W www.stressfreemarine.com.au

NG Series Stress Free Freefall
Stress Free Marine is a recognised leader in Australia for the manufacture of the electric drum-style anchor winch called the Stress Free. A proven new product, the NG Series (released in Australia in July 2008) is a perfectly engineered piece of equipment with built in freefall capabilities as well as power up and down features to lower and retrieve the anchor. The winch is designed to fit into narrow and shallow anchor wells and suitable for both inshore and offshore fishing.

Superior Jetties
Stand 04.102
C J. Hogan
E info@superiorjetties.com
T +61 7 5594 8200
W www.superiorjetties.com

Superior Fender
The Superior Fender delivers a new solution for fender applications offering differing levels of absorption with reduced material and transport costs. The internal fender is color coded for varying hardness while the external fender is available in a range of colors. The outside fender is extruded flat, reducing packing space. The internal fender is cut to different lengths and fitted at varying internals, saving on material cost. The locking strip is an improvement on occupational health and safety issues due to its ease of instalment and removal. It also eliminates the use of nails and screws that can corrode or damage the fender. The locking strip is available as glow in the dark, providing a safety solution during the night.

Superyacht Docs Ltd.
Stand 03.202
C ABHow
E info@superyachtdoc.com
T 023 92 476566
W www.superyachtdoc.com

Atlas Twin Carbon Davits
ATLAS TWIN CARBON DAVIT SWL500kg

Function: To lift and hold a heavy tender in the falls of the davit and remain elegantly styled to blend with the line of the Yachts. Benefits: -Lightweight and low maintenance. Each arm weighing circa 20kgs. -Elegantly styled and coloured to match the yacht. -Carbon finish available. -Capacity to lift weights up to 500kg. -Can be removed at the end of the season with ease as partly portable and lightweight. -Internal drive motors 12 or 24 volt electrical operation. -Hardwearing Dynema rope. -Semi custom is available.

SuperYacht Spares
Stand 10.100
C T.J. Dam
E tdam@superyachtspares.com
T +31 0183-639193
W www.superyachtspares.com

Yard Supply Service
The Yard Supply Service is a unique service to support after sales departments of shipyards in the superyacht industry. The Yard Supply Service provides technical, purchasing and logistic support to after sales departments of shipyards reducing costs and increasing the service level to their yachts. For every shipyard we are able to provide a custom solution based on standardized procedures and years of experience. Integration with yacht management systems is possible. This would enhance the service to the yachts even more. The Yard Supply Service allows the shipyards to focus on their core business and to provide the best possible service to their clients.

Tacktick Ltd.
Stand 03.301
C D.A. Chiverton
E deborah.chiverton@tacktick.com
T +44 1243-379331
W www.tacktick.com

C-66 marine compass
Designed for a variety of uses on both power and sailing boats, the Suunto C-66 compass is being uniquely sold with all the mounting options as standard. The compass is available in black or white and can be bracket, bulkhead, surface or flush mounted. The C-66 marine compass has been precision designed with the Suunto patented card dampening system. The compass is sold with a 5 year warranty and is suitable for a wide variety of boats including dinghies, sailboats and powerboats.

TBS Electronics
Stand 04.407
C D. Schouten
E d.schouten@tbs-electronics.nl
T +31 0229-271246
W www.tbs-electronics.com

Omnicharge Programmable Battery Chargers
TBS Electronics introduces a number of newly developed state of the art programmable battery chargers. Combining new power conversion techniques and the best available parts with years of power electronics design expertise, the Omnicharge battery chargers will deliver long life performance even in the most demanding applications. The very efficient design will reduce running costs and guarantees a maximum charge current per AC Watt. All Omnicharge battery chargers are equipped with advanced 4 stage charging algorithms and temperature compensation for optimal battery performance and long lifetimes. Users are also allowed to create a custom charging algorithm for their specific battery, using the TBS "Dashboard" software.
Techimpex Italiana S.r.l
Stand 05.247
C L. Giacomin
E techimpex@techimpex.it
T +39 0438-738501
W www.techimpex.it

Wine cellar
Techimpex launches a new 12 bottles very compact wine cellar made of stainless steel.
The product is not only one of the most compact of its category, it is also specially well insulated for maximum performance and efficiency.
Techimpex manufactures custom made products and sice bespoke personal commissions are welcome, the company technical team can discuss any customer special requirement and create a truly unique product. Using only the finest hand-craftmanship, top levels of personal service, engineering, design and craft skills are a must for this company.
The unit is available in 230 VAC or 110 VAC.

Microwave oven 12VCC
Techimpex distributes the smallest revolutionary 12VCC microwave oven ( dimensions W 38.1 - D 25.4 - H 27.0 cm ). The oven can be connected to 230VAC supply or 12VDC. The beautiful retro style oven chassis is made of reinforced ABS available in blue, white, red, black color. Power : input 660 W ( output 425 W ) with standard 230VAC or direct battery connection. Each oven is supplied with the following accessories: AC cord 1 mt length DC battery direct connect cord 2,75 mt length DC power outlet cord 1,5 mt length

Custom made gimballing stove for sailing yachts
What is the top end cooker for a modern mega sailing yacht ? Probably this giant size 6 burners st steel gimballed stove with multifunction oven. Just another example of what the Techimpex team can create. Techimpex makes custom made projects. Since bespoke personal commissions are welcome, any special requirement can be discussed with the customer and the result is the creation of truly unique products. Using only the finest hand-craftmanship, the technical team of the company offers levels of personal service, engineering, design and craft skills unmatched in the yachting market. This special heavy duty stove features an extralarge hob with patent pending pan holders and unique sliding gimbals for easy service of the stove.

Letters, Signs, Name plates
Techimpex makes superb lighted letters for personalization of any yacht. The letters can be made according to the request and specifications of the designer of yacht owner. The company has developed a process which makes this product extremely competitive. The products can be made in different materials including stainless steel 316 grade and titanium and can be delivered both in flat non illuminated versions as well as tridimensional version. No matter what the requested size is, we can develop practically any project you may think of.

Seafarer1
New ultra compact built in hob. It is the ideal product for small size yachts. Minimalistic design for modern installations. This special stove is available with the option of feedle rails and slide adjusting pan holders. The hob is supplied wit h an efficient piezo ignition. The burner has precise flame adjustment and is supplied with flame failure protection. The pan support rack is easy to remove for cleaning.

Giga Bbq made of 316 St Steel
Giga bbq is just an example of what Techimpex can create. Techimpex manufactures custom made products, mainly using marine grade 316 st steel. Since the company accepts bespoke personal commissions, the most personal customer requirements can be discussed and it is possible to create truly unique products. Using only the finest hand. craftmanship, Techimpex offers levels of personal service, engineering, design and craft skills unmateched on the market. Giga bbq is custom made according to the above mentioned philosophy. This is actually the largest and probably coolest grill ever made for a yacht ( more tha, 1,5 mt length ! ). The product is not only cool but also very performant featuring a long list of unique accessories.

Top3 for classic yachts
Techimpex will present during the mets the new version of the classic line collection. Prestige Classic is the name of the new collection. The execution of this gas range is cutting edge. This stove is equipped with a heavy duty stainless steel chassis complemented by a cooking grid made out of 8 mm st steel rods. This stove is delievered with an exclusive range of accessories such as detachable heat protectors, gimbals regulators and many others. Each cooker can be tailored to its owner. Should they wish to, customers can choose t obecome involved from the early design stages of their personally commissioned cooker, to meet their personal requirements. The beautiful hand finishing of these stoves is no different to a haute couture dress.

Compact stove
Freeinox.
Free is an innovative performant and ultra compact gas cooker. The hob is supplied with slide adjusting pan holders which enhance safety by helping retain the pots. The gas burner is equipped with a flame supervision device for added safety. This high quality cooker features a professional burner with technological advanced design. The hob is made of stainless steel for durability. Free uses Butane 220 g A4 cartridges which last about 4 hours on low ( 90 min on high ). A special cut-out system assures against gas pressure build up. The cooker is equipped with special piezo ignition. Pan support rack is easily removable for cleaning purposes. The stove can optionally be equipped also with a gimballing system.

Teleflex Marine
Stand 02.416, 02.417, 11.413
C Audra Jarvis
E ajarvis@teleflex.com
T +44 1202 828010
W www.teleflexmarine.com

SeaStar Power Assist Autopilot
SeaStar Power Assist Autopilot from Teleflex Marine converts manual hydraulic steering to power assisted steering for a dramatic reduction in steering wheel loads and at the same time provides a pump for an autopilot installation. The SeaStar Power Assist Autopilot pump is the standard power assist product with the addition of a Type 1 or Type 2 autopilot pump. The SeaStar Autopilot pump is a fixed displacement, reversible pump set that uses a hydraulic gear pump, producing very little vibration or noise. It is offered in 12 and 24 volt configurations,as well as two different pump sizes(type 1 & type 2).

Gimbal Housing Repair Kits For Mercruiser Outdrives
Sierra is now offering the innovative Gimbal Housing Repair (GHR) Installation Kit. This innovative product will benefit the marine maintenance industry and boat owners alike. The Sierra GHR Installation Kit provides a quick and permanent way to repair the gimbal housings on MerCruiser Alpha 1, MerCruiser Gen II and MerCruiser Bravo outdrives. While designed for professional installation only, this product presents an extremely cost-effective service option for owners of boats with these drives. To learn more about the Sierra GHR Installation Kit, or the company’s extensive line of quality engine and drive parts and accessories come to the Teleflex Marine stand.

Seastar DC Power Steering Unit
A new compact, self-contained DC Power Unit is at the heart of this system. Powered by the vessel’s 24V DC power supply (rather than an engine mounted gear pump) the system delivers responsive control at all times, with no reduction in performance at lower RPM. This on-demand system is very economical only drawing power when a turn is initiated (typical duty time 5 â€" 10%). Should the power fail for any reason, an Automatic Manual Back-up feature returns the system to manual mode, ensuring safe vessel operation at all times. With fewer components than traditional engine driven systems, it ’s easy to specify and install power steering for any large boat application. To find out more come to the Teleflex Marine stand.

EPA Compliant Silveradoâ® 3000 Outboard Fuel Line
Shields® has introduced a new multi-layer EPA-compliant fuel line specially engineered and manufactured for outboard powered boats. The Shields Silverado® 3000 outboard fuel line is designed for use in above deck primer bulb assemblies and meets EPA regulations for evaporative emissions. To ensure this fuel line performs in the harsh marine environment, Shields uses an advanced thermoplastic construction which resists damage from prolonged UV exposure, while providing a unique barrier layer to prevent permeation. For more information about the new Shields Silverado 3000 fuel line - or the company’s extensive range of premium quality hoses and accessories for the marine industry.

Over 80 new engine products for 2010
New for 2010 are 7 new ignition products, a new trim pump kit for Mercury outboards, a tune-up kit for Mercruiser engines and 36 new fuel system parts, including many for the growing number of four-stroke outboards. Sierra continues to expand its offering of thermostats and thermostat kits for Volvo and Yamaha applications. There is a new selection of anodes for a wide variety of engines and three new fully synthetic oils to meet the demands of direct injection 2-stroke outboards. Renowned for quality and performance, Sierra parts are manufactured to meet the highest standards and are backed by an industry-leading warranty.

Instructional Videos
Teleflex Marine, a leading provider of steering, controls, cables, hoses, switches and engine and drive parts for the marine industry, has created a number of very useful instructional videos for boat owners. The videos cover a range of topics including: how to measure up for fitting control and steering cables, engine tune-ups, upgrading from mechanical to hydraulic steering, changing engine oil, hydraulic steering maintenance and more. The aim of the videos is to give the boat owner a better understanding of their boats’ systems, help them avoid breaks downs and increase their enjoyment of boating. To view them, go to the international section of www.teleflexmarine.com where you will find them under the Marketing menu.

Winterisation Article
It may seem strange, but winter “time off― can be especially hard on your boat. Extended periods of inactivity actually accelerate wear and tear and can contribute to breakdowns next season. Left unchecked, corrosion will spread (remember, rust never sleeps), moisture can intrude and freeze, lubrication can congeal and neglect can take root over the long, cold months.

The Stainless Company B.V.
Stand 10.202
C G.L.J. Kluytmans
E info@TheStainlessCompany.com
T +31 412 403007
W www.thestainlesscompany.com

Allaway bollard
The Stainless Company recently designed and developed a bollard that sinks into a ship's deck to become almost invisible when not in use. This innovative bollard is custom-made, easy to fit, easy to use and durable. In its operating position, sticking out of the deck, the Allaway Bollard is used just as any conventional bollard is used. When the Allaway Bollard is not needed, it can be effortlessly pushed down into the deck, where it automatically locks into position, flush with the teak deck surface. It saves precious space on narrow gangways and swimming decks and the like. And because the same teak is used in the bollard design as for the decking, the bollard is almost invisible in the locked down position.

TWIN DISC S.r.l.
Stand 01.653
C I. Bellucci
E belluci.karia@twindisc.com
T +39 0571-97911
W www.twindisc.com

ASD18A1S3 - ASD18A1L3 Surface Dirve
Twin Disc is pleased to offer this preview of the upcoming release of the exciting new ASD 18A1S3 and ASD 18A1L3 Arneson Surface Drives. With pleasure craft propeller shaft torque ratings of 21,500 lb-ft (18S) and 30,000 lb-ft (18L), this drive extends the benefits of Arneson Surface Drives into larger high performance Yachts, suitable for use up to 4,800 mHP. Like all Arneson Surface Drives, the ASD 18A1S3 and ASD 18A1L3 are trimable and steerable and are designed to rovide maximum vessel performance and economy. Manufactured from corrosion resistant marine grade aluminum, stainless steel and bronze, the ASD18 series is engineered to provide long life with reduced maintenance requirements.

Unimer Marine
Stand 09.216
C R. Johnson
E info@unimer-marine.com
T +46 35144114
W www.unimer-marine.com

Smart snubber for mooring from Unimer Marine
The Smart Snubber from Unimer is a new and innovative solution to easily compensate your boat for instant loads on your mooring lines. Suitable for all kinds of moorings. The Smart Snubber is fitted to the line fast and easy. The assembling process does no require any free end of the line. It comes in two sizes, fitted for lines up to 16 mm and 20 mm. The material is a special polyurethane with outstanding durability and stretch ability that will do the job in all weather conditions and still keep its shape and tension after many years. The compensation effect you need is highly dependent on your boat and mooring lines. You can easily add more snubbers to the same line to increase the compensation effect.

Valdenassi Emanuele Maria
Stand 05.427
C V. Valdenassi
E valdenassi@valdenassi.com
T +39.0184462050
W www.valdenassi.com

George
George is the icon of charming and succesful man like the chair dedicated to him. It only takes a glance to be captured by its charme. You can't take your eyes off it for its elegance and personality. A clean beauty, an authentic and contemporary style. We are talking about the characteristics that join George and the new director chair made in Italy, which takes his name and it's dedicated to him by Valdenassi. George is entirely realised in polished stainless steel and, thanks to a licensed particular mechanism, its arms turn downwards, folding completely on itself, reducing the encumbrance and become easy to carry. George is available in marine version made in AISI 316 for the use on yachts with sumbrella fabrics.

VEEM Propellers & Propulsion
Stand 11.115
C B. Miocevich
E props@veem.com.au
T +618 9455 9355
W www.veem.com.au

VEEMSurf Interceptor Propeller
The VEEMSurf Interceptor Propeller is the latest in surface piercing propeller design. It has been developed to meet the requirements of high speed planing vessels and features a cleaver-type blade profile, with hollow faced, wedge shaped sections, designed to optimise shock free entry, and hence provide smooth operating characteristics.

Vetus N.V.
Stand 01.225
C A. van der Walle
E Info@vetus.nl
T +31(0) 104377700
W www.vetus.com

Fresh Water Tank Systems
The new Vetus fresh water tank systems feature a high grade, food quality polythene tank with an electric pump. Utilising a variable speed pump motor, an inbuilt sensor regulates the water pressure and ensures a steady flow. Therefore, a conventional pressurised water system is no longer required and installation time can be greatly reduced. All connections for filling, suction and ventilation are supplied installed, together with a filter in the suction line and an ultrasonic level sensor. An inspection cover, for cleaning the inside of the tank is also fitted as standard. These systems are available with tank capacities of 42, 61, 88 or 120 litres. The pump motor is available for 12 or 24 Volt and the output is 13.5 l/min at zero head.

Splash stop
The Vetus splash-Stop is a unique device which connects directly under the fuel filler deck plate. It ensures that overflowing fuel or foam cannot come back out, thereby soiling the deck and possibly polluting the environment. The splash-Stop also prevents fuel spillage through the vent line due to blow back or expansion. The housing and hose connections are made of anodized aluminium and all materials comply with the relevant CE and ABYC directives. Excess fuel is collected in a parallel hose, which functions as a reservoir. The capacity of the reservoir is determined by the length and diameter of the hose, so the installer is free to determine the actual size of the reservoir.

W. Hayward Engineering
Stand 03.506
C W. Hayward
E whayward@onetel.com
T +44 780-3821659
W www.gasboat.net

Gas fittings
We have a complete new range of marine grade regulators incorporating 40mm diameter marine grade pressure gauges with easy to read scale. We have a new marine grade manual change-over valve to connect up two of the same or two different types or size of gas cylinder. For example you could connect a Camping Gaz cylinder to one side and a Propane cylinder the other. We have two more adaptors, this means there are now eight cylinders adaptors in the Hayward Worldwide Cylinder Adaptor Cruising Kit. We are the only company to produce an adapter for Primus cylinders. We have a solution to every gas related problem to face the boat builder and the end user wherever he may be in the world! Once again we have more new products to launch at Mets 2009!

WAI Europe B.V.
Stand 05.523
C R.R. Hoekman
E ramon.hoekman@waiglobal.com
T +31 079-3621177
W www.waiglobal.com

Starters, Alternators and parts
WAI is proudly introducing the WPS Brand of Complete Units. Since 1979, WAIglobal's mission statement has been First to Market! WAIglobal serves the professional automotive electrical rebuilder with a full range of component parts and replacement units for passenger car, heavy duty, industrial, off-highway, marine, motorcycle, small engine, and specialty market applications. WAI# 1-2886-01VA -12V, 65 AMP -Delco O.E Alternator to replace Volvo Penta (3862612) -for more info www.waiglobal.com

WamBlee s.r.l.
Stand 05.355
C Ms I.Gallignani
E ivana.gallignani@wamblee.it
T +39 0546-623891
W www.wamblee.it

W400
The Personal "Resque-Me*" W400 is an alert security personal device, usable with the life jacket worn, able to send a distress signal in case of accidental fall in water or following a manual activation.

W400 MOB (Man Overboard)
The W400 is a compact and lightweight security personal device able to send a distress signal in case of man overboard. It is equipped with a high efficiency flashing LED for better finding men in water in case of bad visibility. It is complete with long lifetime batteries up to 24 hours of continuous operation. It can be activated manually by the operator or automatically with water contact when men fall overboard. It is equipped with test function that indicates the battery status and the correct operation of the device. The antenna is enclosed in a flexible rubber hose suitable for being worn around the neck or placed directly on the life jacket. The device works on an international standard frequency used by SAR units.

Warning S.A.
Stand 11.431
C M. Fachidis
E info@warningsa.com
T +30 23920 72732
W www.warningsa.com

Water Warning System model G3
The G3 model is the latest addition to the Water Warning System product line. The G3 takes after the form of standard water/contaminant concentration bowls, commonly found equipped on marine fuel filters. Its innovation, however, lies in the built-in electronic detection circuit, which in conjunction with its beeper, provide the user with the added features of fast and accurate water detection and warning to both diesel and gasoline applications. Pre-assembled and ready-to-fit, it is specifically designed to work in synergy with fuel filters and is an ideal choice for users who wish to take their existing fuel filtration installations to a whole different level of protection.

Weatherdock AG
Stand 01.121
C A. Kotouczek-Zeise
E akotouczek@weatherdock.de
T +49 911-376638-31
W www.weatherdock.de

Personal locator beacon on the base of AIS technology
PLBs are known around the world. But the big disadvantage of the nowadays systems is, that the boat which lost the passenger cannot locate the position of the man overboard. With the brandnew unit, which transmits the actual GPS position by means of AIS, the man overboard can be seen of each commercial vessel and of each pleasure boat, having AIS on board.

Webasto
Stand 11.703 and 11.603
C Anna Mueller
E anmueller@webasto.de
T +49-89-85794-1718
W www.webasto.de

Webasto Marine Central Heating Station
The new Webasto marine water stations are professional solutions which operate quietly and have compact dimensions in all versions and capacities ranging from 11.6 kW up to 35 kW. It consists of high-quality components and is operate by environmentally-friendly burners.

Wessex Resins & Adhesives Ltd.
Stand 03.407
C I. K. Oliver
E ian.oliver@wessex-resins.com
T +44 1794-521111
W www.wessex-resins.com

Six10 Epoxy Adhesive
A 2-part epoxy supplied in a tube that delivers point-and-shoot convenience. Measuring and working with epoxy resin and hardener has now become easy. West System® now offers the permanent, waterproof, gap-filling and gluing performance of their two-part epoxies in a convenient point-and-shoot package. This new Six10 Thickened Epoxy Adhesive meters the correct ratio of epoxy resin and hardener from a multi-chambered tube that fits in any standard caulking gun. The pre-thickened components pass through a static mixer in which they are fully blended before being dispensed in a smooth, workable bead.

G/flex 650 Epoxy
A toughened, versatile, liquid epoxy for permanent waterproof bonding of fibreglass, ceramics, metals, plastics, damp and difficult-to-bond woods. With a modulus of elasticity of 150,000 PSI (approx 1 GPa), it is more flexible than standard epoxies and polyester, but much stiffer than adhesive sealants. This gives G/flex the ability to make structural bonds that can absorb the stress of expansion, contraction, shock and vibration. It is ideal for bonding dissimilar materials. It can be modified with West System fillers and additives, and used to wet-out fibreglass tapes and fabrics. Mixed at a 1:1 ratio, G/flex has approximately 45 minutes of working time at room temperature.

G/flex 655 Epoxy
A thickened, easy-to-use epoxy that permanently bonds fibreglass, ceramics, metals, plastics, damp and difficult-to-bond woods. G/flex is toughened to make structural bonds that absorb the stresses of expansion, contraction, shock and vibration. Glue resinous woods, exotic woods and a wide range of dissimilar materials. Repair aluminium, plastic and wooden boats, kayaks and canoes.

White Elephant Automobile Accessory Factory
Stand 11.228
C Y. Jiang
E w.e@china-wiper.com
T +86 577-62882297
W www.china-we.com

Wiper System
Wiper systems for marine using. Keep window shield clean and tidy, and enhance the safety under bad situation.

Wichard
Stand 01.720
C E. Butreau
E ebutreau@wichard.com
T +33 2 51 76 00 30
W www.wichard.com

Greenox: biodegrdable cleaner for marine hardware
Wichard launches on the market a new biodegradable cleaner (Greenox) for marine hardware. Greenox allows to clean and make shiny any stainless steel parts but also aluminium, copper and brass ones. It is therefore suitable for stainless steel hardware, reefing -furling systems, masts, booms, pullpits / pushpits and also knives. Its non-stick hydrophobic coating slows down the accumulation of dust. Greenox is also biodegradable at more than 90% under 28 days (according to OCDE 303A). Therefore Greenox is a non-toxic product for the end-user. Thanks to its paste, Greenox is also easy to use and avoids waste. Volume: 100 ml (3,38 oz). Part#: 9602.

Speedlink: new trigger snap shackle
Speedlink is dedicated to spinnaker operations on racing boats and offers one of the best weight / performance ratio of the market (Weight: 52g). Developed by using finite element analysis software, Speedlink has an optimised design thanks to its shape, cut-outs and ribs. The opening under load, whether manually or using release fid, is easy and effortless thanks to the generous passage diameter and its optimised slopes. The special shape of the latch reduces inertia and avoids unintentional opening, especially under impact. Forged in HR stainless steel Working load: 1100 Kg (2420 Lbs). Breaking load: 2300 Kg (5070 Lbs). Weight: 52g (0,114 Lbs). Length: 74 mm (2' 29/32'' inch). Part#: 2650. Retail price: 85 euros (in France).

Speedlink
Developped by Wichard Speedlink is a new trigger snap shackle offering one of the best weight/performance ratios on the market and dedicated to spinnaker operations on racing boats. It was developed using finite element analysis software to optimise its design. Its shape, cut-outs and ribs make it extremely light. Its ultra-technical lines make it one of the most modern and efficient snap shackles available. Its design prevents adjacent lines from jamming. Opening under load, whether manually or using the release fid, is easy and effortless thanks to the generous passage diameter and its optimised slopes. Speedlink prevents also from accidental opening. Speedlink is forged in HR SSteel and bears exceptional working and breaking loads.

WRINO
Stand 04.102
C W. P. Wright
E wpeterwright@yahoo.com.au
T 07 55 385725
W www.wrino.com.au

WRINO Recovery
WRINO - Wright Innovation; an Australian company, invents, designs and manufactures marine products. The companies first innovation the WRINO Boat Mooring Hook reduces the stress of boat mooring by the ability of quickly and easily placing mooring lines to dock cleats,bollards and pylons,from the safety of a boat deck. The product won a United States 2008 NMMA innovation award, 2008 Australian International design award and marine innovation award. The new WRINO Recovery, is a modified WRINO boat mooring hook and patent pending WRINO high strength connect/disconnect snap-hook, designed specifically for marine rescue, to assist retrieval of small disabled planing hull boats. For all recreational boaters WRINO Rec assists mooring